Results 1 to 10 of 26
-
August 2nd, 2013, 07:07 PM #1Active Member
- Join Date
- Sep 2012
- Location
-
jenkintown,
Pennsylvania
(Montgomery County) - Posts
- 116
- Rep Power
- 4307
1911 in 9mm whats your preference?
I have recently ordered a Dan Wesson point man 9mm. I know I will not see this pistol for a while. Right now I have a Rock Island 22tcm and 9mm combo. I have had nothing but fun with this pistol. I want another single stack to go with my pm9 so any suggestions? I want to stay under 1300 not adverse to used.
-
August 3rd, 2013, 12:37 AM #2Grand Member
- Join Date
- Dec 2010
- Location
-
back to Port Charlotte,
Florida
- Age
- 60
- Posts
- 5,483
- Rep Power
- 3627622
Re: 1911 in 9mm whats your preference?
I have two PT 1911's in 9mm (identical, parkerized) that I preferred because I got them for $1070 OTD for both. I have given both of them the 'redneck customs' enhancements and have yet to have to replace any parts, though I have to put a hammer in one of them because I took a little too much off of the hooks. There is no hammer follow, but the hammer does not go back at all before it drops with the trigger pull...something that I do not like, and there isn't enough left to correct it. Anyway, I got them shooting pretty well and will call them keepers, for sure. They are natural speed shooters, as well. Great for plate and pin shooting.
BCM and Glock...for a bigger pile of 'cold dead hands' brass.
-
August 3rd, 2013, 01:19 AM #3Banned
- Join Date
- Dec 2012
- Location
-
The land o' cotton, old times there are not forgotten
- Posts
- 3,536
- Rep Power
- 0
Re: 1911 in 9mm whats your preference?
My preference for a 1911 in 9mm is a 1911 in .38 Super.
-
August 3rd, 2013, 02:56 AM #4
Re: 1911 in 9mm whats your preference?
Smith & Wesson Pro-Series 1911. Right at the $1300 mark new. Got mine ANIB for a couple hundred less. Superb gun that loves my 125 grain lead reloads.
The Taurus PT-1911-9 is a pretty darned nice pistol for the money. $525 blued, $640 stainless. Built better than just about ant gun Taurus ever made.NRA PATRON LIFE MEMBER, GOA, SAF, PAFOA
-
August 3rd, 2013, 08:31 AM #5
Re: 1911 in 9mm whats your preference?
Edited: Sorry, forgot you specified 9mm. I've read a lot of guys don't like SA 9mms'. Besides, everybody should have at least one 1911 in 45acp. Maybe you already do.
STI makes some nice 9mm 1911s'. Spartan and Trojan come to mind.
Springfield Armory has some nice offerings and you get an actual lifetime warranty with them. Bright side is, you'll probably never need to use it.
If you don't mind adj. sights, the SA RO is as solid as they come in the sub 1000 dollar range. {45acp}Last edited by SauerGrapes; August 3rd, 2013 at 08:42 AM. Reason: for content
I love the smell of gunpowder in the morning.[
R.I.P......Murphy.
-
August 3rd, 2013, 09:38 AM #6
Re: 1911 in 9mm whats your preference?
Sti spartan 9mm. for the money it cant be beat, imo.
I have had surprisingly few homeless people hire me. - GunLawyer001
-
August 3rd, 2013, 09:50 AM #7Senior Member
- Join Date
- Sep 2012
- Location
-
State College,
Pennsylvania
- Posts
- 299
- Rep Power
- 6908
Re: 1911 in 9mm whats your preference?
Yeah, if you already have a Rock Island, and STI would be my choice, or maybe a Para, pretty sure they make a 9mm.
-
August 3rd, 2013, 12:47 PM #8
-
August 3rd, 2013, 01:46 PM #9
Re: 1911 in 9mm whats your preference?
I have a 9mm 1911 Springfield, front in the picture. The one behind is the one to get if you can find one. A S&W 952. It will shoot under 2" @ 50 yards. Good luck with the Dan Wesson. They make a fine pistol.
-
August 3rd, 2013, 05:19 PM #10
Re: 1911 in 9mm whats your preference?
If I had $1300 it would be the Trojan.
That's assuming I couldn't scratch up $600 more and get another Eagle......
LycanreallylikingtheEaglethrope
I taught Chuck Norris to bump-fire.
Similar Threads
-
tell me your preference!
By goose585 in forum PistolsReplies: 37Last Post: February 22nd, 2012, 04:30 PM -
powder preference for 223, 308, 30/30 and possibly 7.62x39
By ham385 in forum Ammunition & ReloadingReplies: 27Last Post: February 8th, 2011, 01:23 AM -
Fiber optic pistol sight preference?
By zachomega in forum PistolsReplies: 3Last Post: July 27th, 2010, 08:25 PM -
Brass preference?
By Jaybird777 in forum Ammunition & ReloadingReplies: 20Last Post: February 4th, 2010, 08:41 PM -
.224 diameter preference
By PBArcher8 in forum GeneralReplies: 14Last Post: May 19th, 2008, 01:22 PM
Bookmarks