Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: trying to find

  1. #1
    Join Date
    Mar 2013
    Location
    wilkes barre, Pennsylvania
    (Luzerne County)
    Posts
    3
    Rep Power
    0

    Default trying to find

    i'm on lists, i'm waiting and waiting, i'm looking, i'm calling, and to very little avail.

    does anyone know of a shop in eastern PA that has a ruger sr1911 in stock?

  2. #2
    Join Date
    Dec 2010
    Location
    back to Port Charlotte, Florida
    Age
    60
    Posts
    5,483
    Rep Power
    3627622

    Default Re: trying to find

    The last two hard to find guns I got (EAA Witness, P226) was through the FL gun directory. I just started calling every day till I found one and bought it right then. I even called dealers out of state. Both of the one's I found were customer cancellations, so I got lucky on both. Maybe try the directory for gun shops in PA. FWIW, be prepared to pay top $$$ for that gun.

    Edit: I deleted the post that has one on Gun Broker. Last bid was $889 with no reserve and it appears it is going to be relisted. Hope you got deep pockets if you find one.
    Last edited by harold63; March 12th, 2013 at 09:08 PM.
    BCM and Glock...for a bigger pile of 'cold dead hands' brass.

  3. #3
    Join Date
    Mar 2013
    Location
    wilkes barre, Pennsylvania
    (Luzerne County)
    Posts
    3
    Rep Power
    0

    Default Re: trying to find

    thanks for the info.
    when the shops finally get any in and my name comes up i will buy it as long as they are not gouging the price, otherwise it sits on their counter and i go home. this guy is not paying near or over retail, i will leave it sit. it very well can be worth more but i'm not going to be gouged for it.

    still going to keep looking, waiting, and calling around. hopefully one of the small guys will get one in so i can support them. i still see current sales under $700, when in stock-that's the key . hoffman's is/was $689 in stock today.
    thanks again.

  4. #4
    Join Date
    Dec 2010
    Location
    back to Port Charlotte, Florida
    Age
    60
    Posts
    5,483
    Rep Power
    3627622

    Default Re: trying to find

    Quote Originally Posted by alleng View Post
    hoffman's is/was $689 in stock today.
    thanks again.
    Why not that one?
    BCM and Glock...for a bigger pile of 'cold dead hands' brass.

  5. #5
    Join Date
    Mar 2013
    Location
    wilkes barre, Pennsylvania
    (Luzerne County)
    Posts
    3
    Rep Power
    0

    Default Re: trying to find

    Quote Originally Posted by 300WM View Post
    Why not that one?
    I told my wife, and myself, that I was not paying over $700 for it.

    I would rather buy from a local shop but I wouldn't hesitate if I found one a bit cheaper on the net. just a personal preference, trying to get my best or acceptable price, and I'm not in a rush or need to have one. I just really w a n t one.

    I would give a local guy $690. I'd give Hoffman's $690 but then I have to pay $30 to ship.
    I can handle spending cuts even if BIG government can't.

  6. #6
    Join Date
    Dec 2010
    Location
    back to Port Charlotte, Florida
    Age
    60
    Posts
    5,483
    Rep Power
    3627622

    Default Re: trying to find

    Quote Originally Posted by alleng View Post
    I told my wife, and myself, that I was not paying over $700 for it.

    I would rather buy from a local shop but I wouldn't hesitate if I found one a bit cheaper on the net. just a personal preference, trying to get my best or acceptable price, and I'm not in a rush or need to have one. I just really w a n t one.

    I would give a local guy $690. I'd give Hoffman's $690 but then I have to pay $30 to ship.
    I can handle spending cuts even if BIG government can't.
    The cheapest one I saw down here was at a recent show for $759. It was sold within an hour of me seeing it. It is also the only new one I have seen anywhere near me in months. Anyway, good luck with your search.
    BCM and Glock...for a bigger pile of 'cold dead hands' brass.

  7. #7
    Join Date
    Jun 2010
    Location
    North East, Pennsylvania
    (Lackawanna County)
    Age
    48
    Posts
    18
    Rep Power
    0

    Default Re: trying to find

    Hoffman's wont ship their SR1911's right now. I called them two weeks ago and I was told they wont ship them. I found one at my local Gander Mountain the same day I called Hoffmans. I paid more for it at Gander Mountain than the Hoffman's price but it was the only one I could find. I could have driven to Hoffmans and bought it but the cost of fuel would have put it over the Gander Mountain price. If you find one for under $700 you better buy it on the spot because it wont last long.

  8. #8
    Join Date
    Sep 2012
    Location
    Duryea, Pennsylvania
    (Luzerne County)
    Posts
    71
    Rep Power
    1710

    Default Re: trying to find

    I have been on a waitlist for one for about 2 months now. I know someone who waited about a year before he got the call that one had come in.

    I am in no hurry for the SR1911 my other "want" came in 2 weeks later, I picked it up and there is just no room in the budget right now.

  9. #9
    Join Date
    Jul 2012
    Location
    Tamaqua, Pennsylvania
    (Schuylkill County)
    Posts
    291
    Rep Power
    54814

    Default Re: trying to find

    Try Ed's in Tamaqua. Was in there last night he just got some ruger SR's in. The ones I saw were 40's and 9's didn't really look hard. Not too far for you, about 45 minute drive right down 81. Call first, 570-668-1080, open til 7pm tonight.
    Last edited by paptini; March 13th, 2013 at 05:11 PM. Reason: operator headspace

  10. #10
    Join Date
    Jan 2013
    Location
    Oaks, Pennsylvania
    (Montgomery County)
    Age
    56
    Posts
    224
    Rep Power
    716004

    Default Re: trying to find

    MSRP is $829 $700 is a bargain.

Page 1 of 2 12 LastLast

Similar Threads

  1. Anybody know where I can find some 32 S&W?
    By Avi90 in forum Ammunition & Reloading
    Replies: 2
    Last Post: July 7th, 2010, 02:16 PM
  2. Where do I find
    By Brick in forum General
    Replies: 3
    Last Post: December 11th, 2009, 12:51 PM
  3. trying to find...
    By RJT in forum General
    Replies: 5
    Last Post: November 14th, 2009, 06:00 PM
  4. Can someone find this for me?
    By Pro2A in forum General
    Replies: 7
    Last Post: October 20th, 2008, 10:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •