Results 1 to 9 of 9
Thread: Black rifle help
-
February 27th, 2013, 06:16 PM #1
Black rifle help
So i snagged a YHM diamond quad rail for my bushy, but i do not have a vice, or blocks or an armorers wrench. I figured I would ask here, and supply a 6 pack for some assistance in the name of AR mods. Thank you for looking.
Mostly browsing these days, and expanding the collection.
-
February 27th, 2013, 09:50 PM #2
Re: Black rifle help
I did my brothers by hand I pushed down and he spilt them apart.
We must all hang together, or assuredly we shall all hang separately.-Benjamin Franklin
-
February 27th, 2013, 10:31 PM #3
Re: Black rifle help
Yeah, Its a free float rail, which requires removal of the FSB, barrel, barrel nut, and delta rings. So a armorers wrench, a upper to vise block, and a vise is needed to properly remove and torque the barrel. If this was a two piece drop in set up like factory AR grips are, then i would hand in my man card for asking for help on the interwebs for that task. Thank you though for the reply, I just wish that was the case.
Mostly browsing these days, and expanding the collection.
-
February 28th, 2013, 08:59 AM #4Member
- Join Date
- Jul 2011
- Location
-
telford,
Pennsylvania
(Bucks County) - Posts
- 68
- Rep Power
- 19
Re: Black rifle help
i sent you a pm i have the tool but no vice. when i did mine way back i didnt need to remove to barrel its self. just the nut. replaced it with the new nut then i used a torque wrench to set the new nut.
-
February 28th, 2013, 06:50 PM #5
Re: Black rifle help
Gotcha I'm new to the AR game. I have a vice but that's about it. (How many Poofa members does it take to change an AR fore end).
We must all hang together, or assuredly we shall all hang separately.-Benjamin Franklin
-
February 28th, 2013, 07:07 PM #6
Re: Black rifle help
Like others said, You can do it by hand. Saw a video on boob tube.
"The chair is against the wall, John has a long mustasche"
-
March 1st, 2013, 10:44 AM #7Member
- Join Date
- Feb 2011
- Location
-
Levittown,
Pennsylvania
(Bucks County) - Posts
- 47
- Rep Power
- 0
Re: Black rifle help
I have the DPMS multi tool and live in Levittown. I have a vice also but not block that you are looking for. I live in Levittown.
-
March 1st, 2013, 01:31 PM #8
Re: Black rifle help
Well, Im going to give it the ol' ghetto try and see if that can do it, if not then im going to pony up and buy the blocks. Or im going to get creative with some lumber. Thanks for the replies!!
Mostly browsing these days, and expanding the collection.
-
March 1st, 2013, 09:00 PM #9Member
- Join Date
- Feb 2011
- Location
-
Levittown,
Pennsylvania
(Bucks County) - Posts
- 47
- Rep Power
- 0
Re: Black rifle help
Good luck. Hollar if ya need help.
Similar Threads
-
Black Rifle Run Started?
By pa350z in forum GeneralReplies: 80Last Post: December 19th, 2012, 07:01 PM -
Black Rifle, Black Friday SALE at Elite Tactical!! Magpul, Adams Arms, Troy & MORE!
By EliteTacticalComponents in forum GeneralReplies: 0Last Post: November 23rd, 2012, 03:06 AM -
BLACK FRIDAY BLACK RIFLE KIT SALE
By freddy g in forum GeneralReplies: 0Last Post: November 25th, 2011, 01:28 PM -
Looking for black powder rifle
By beinroc in forum GeneralReplies: 0Last Post: March 11th, 2009, 02:38 AM -
new black rifle
By brian in forum GeneralReplies: 8Last Post: April 9th, 2008, 07:34 PM
Bookmarks