Results 1 to 9 of 9
Thread: Sig mags
-
February 11th, 2013, 08:39 PM #1
Sig mags
Can you put a sig 226 mag in a 229 like you can with a g17 into a g19?
-
February 11th, 2013, 09:23 PM #2
Re: Sig mags
I think so. Go to your local gun shop and ask if they have a 226 mag that you can try out in yours.
-
February 11th, 2013, 10:08 PM #3Senior Member
- Join Date
- Sep 2012
- Location
-
State College,
Pennsylvania
- Posts
- 299
- Rep Power
- 6908
Re: Sig mags
Yes you can, I believe they stick out past the end of the grip a bit, but they will work.
-
February 12th, 2013, 01:26 AM #4
Re: Sig mags
Here's a pic
-
February 12th, 2013, 11:53 AM #5Grand Member
- Join Date
- Sep 2006
- Location
-
Pennsylvania
(Allegheny County) - Posts
- 1,692
- Rep Power
- 2798092
Re: Sig mags
I can use a 9mm 226 mag in my 228 and I think the 228 and 229 mags interchange.
As long as they are meant for the same caliber.
Don't quote me on that one.Last edited by ALS; February 12th, 2013 at 05:13 PM.
-
February 12th, 2013, 03:21 PM #6
Re: Sig mags
I am reviewing my Sig Sauer P-226 Specifications in the Manual:
It states: The 9mm barrel and MAGAZINE ARE NOT INTERCHANGEABLE
with the .357 Sig or .40 S&W. The Sig .357 and the 40 S&W barrels CAN be
interchanged on the P-226 and the SAME MAGAZINE can be used for the .357
SIG or .40 S&W cartridges. (Page 21 of the manual).
Sig Sauer P229: The 9mm barrel and magazine ARE NOT INTERCHANGEABLE with the .357 Sig or 40 S&W. The .357 Sig or 40 S&W can be interchanged
on the P-229 and the same magazine can be used for the .357 Sig or 40 S&W
cartridges. (Page 23 of the manual).
Sig Sauer P-239: The .357 Sig and 40 S&W barrels can be interchanged in
the P-239. Each caliber will require a caliber specific magazine. Magazines are
not interchangeable between calibers. The 9mm barrel and magazine are not
interchangeable with the .357 Sig or 40 S&W. (Page 24 of the manual)
Check further with Sigforum.comFUNDAMENTALS
"All that is needed for Evil to Prevail is for Good Men to
do Nothing"
-
February 12th, 2013, 03:29 PM #7
-
February 12th, 2013, 06:58 PM #8Member
- Join Date
- Sep 2010
- Location
-
Northampton,
Pennsylvania
(Northampton County) - Posts
- 82
- Rep Power
- 5574
Re: Sig mags
you can interchange the mags the p226 mags will wobble a little in the p229. and in the scenes of using a conversion barrel 9,40,and 357 sig all feed fine out of the same mags in my experience
-
February 12th, 2013, 11:28 PM #9
Re: Sig mags
Thanks guys
Bookmarks