Results 1 to 10 of 13
Thread: Glock 23 40/9 conversion
Hybrid View
-
February 11th, 2013, 05:12 PM #1Banned
- Join Date
- Nov 2008
- Location
-
Allentown Pa/Lehigh valley,
Pennsylvania
- Posts
- 7
- Rep Power
- 0
Glock 23 40/9 conversion
This is for range use only......i have a coversion barrel for
my glock 23 40 to 9mm . Can use the 40 mags to shoot 9mm range use only.
-
February 11th, 2013, 06:38 PM #2
-
February 11th, 2013, 07:26 PM #3Grand Member
- Join Date
- Feb 2012
- Location
-
Newtown,
Pennsylvania
(Bucks County) - Posts
- 1,021
- Rep Power
- 3088172
Re: Glock 23 40/9 conversion
You will need Glock 9mm mags (Glock 19 mags will fit flush)
-
February 11th, 2013, 09:55 PM #4Banned
- Join Date
- Nov 2008
- Location
-
Allentown Pa/Lehigh valley,
Pennsylvania
- Posts
- 7
- Rep Power
- 0
Re: Glock 23 40/9 conversion
what needs to be replaced if I want to carry it as a 9mm, to make it 100%reliable, I already have Glock 19 mags
Extractor I assume, what else
Thanks
-
February 11th, 2013, 10:40 PM #5Super Member
- Join Date
- Oct 2007
- Location
-
Phoenixville,
Pennsylvania
(Chester County) - Posts
- 573
- Rep Power
- 21474853
Re: Glock 23 40/9 conversion
I was told by a Glock armorer at the last Oaks show that nothing else is needed to convert a G23 to a 9mm "G19" except the barrel and new magazine. He said everything else is the same - extractor, recoil spring, etc. He also said the barrel to convert to 9mm is just a standard G19 barrel, nothing special about it.
You do need to use Glock 9mm magazines in place of the G23 40 mags.
In any case, I bought a 9mm Lone Wolf barrel and it works perfectly in a G23.
-
February 11th, 2013, 11:23 PM #6Member
- Join Date
- Jan 2009
- Location
-
Mechanicsburg,
Pennsylvania
(Cumberland County) - Posts
- 55
- Rep Power
- 10996
Re: Glock 23 40/9 conversion
I have a Glock 27 and have a 40-9 barrel. Basically the same thing but subcompact. Just swap the barrel and use the 9mm mags. Very simple. I've never had a problem with mine. I use it as a 9mm more than a 40sw. Once I get a dedicated 40sw then my G27 will always be a 9mm
-
February 12th, 2013, 07:58 PM #7Grand Member
- Join Date
- Feb 2012
- Location
-
Newtown,
Pennsylvania
(Bucks County) - Posts
- 1,021
- Rep Power
- 3088172
Re: Glock 23 40/9 conversion
I would have GUESSED that the barrels are different because of the OD of the barrel. I know you can fit a .40 barrel in a 9mm slide, so how is it that a factory 9mm barrel will fit in a .40 slide without there being excess clearance around the barrel?
I was under the impression that 9mm "conversion" barrels have the OD of a .40 bbl and ID of a 9mm bbl
Similar Threads
-
glock 22 cal. conversion kit?
By rayval123 in forum GeneralReplies: 7Last Post: February 3rd, 2012, 11:04 AM -
Glock .50 cal conversion
By RONNIE77 in forum GeneralReplies: 9Last Post: April 22nd, 2011, 02:50 AM
Bookmarks