Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Join Date
    Feb 2012
    Location
    Aliquippa, Pennsylvania
    (Beaver County)
    Posts
    21
    Rep Power
    0

    Default Mosin Nagant - Cracked stock

    So I just picked up a 91/30 Mosin a few weeks ago. Finally got all the cosmoline off and I realize the stock is cracked behind the recoil lug and near the rear action mounting screw.

    I cleaned and decreased as best as I could and glued it up with Titebond II and clamped it overnight.

    It seems okay, but I'm reading mixed things on keeping it from cracking again.

    I've seen websites saying to use an epoxy to bed the action, using aluminum pilars on the mounting screws, shimming the recoil lug, and going as far as installing brass screws or pins across the stock.

    What's everyones thoughts?


    Don't worry, I cleaned it a lot more before gluing.


  2. #2
    Join Date
    Jan 2011
    Location
    Upper Bucks, Pennsylvania
    (Bucks County)
    Age
    34
    Posts
    2,170
    Rep Power
    532038

    Default Re: Mosin Nagant - Cracked stock

    if you're worried pick up another stock...they use to be had for cheap...check ebay

  3. #3
    Join Date
    Dec 2006
    Location
    ..- -. .. - . -.. ... - .- - . ...
    Posts
    2,822
    Rep Power
    69394

    Default Re: Mosin Nagant - Cracked stock

    Quote Originally Posted by tuxie555 View Post
    What's everyones thoughts?


    Don't worry, I cleaned it a lot more before gluing.

    Crack runs parallel to the barrel, right? Not much chance that's anything more than cosmetic. That's a laminated stock and should have a transverse bolt passing right through that crack anyway.
    Gloria: "65 percent of the people murdered in the last 10 years were killed by hand guns"
    Archie Bunker: "would it make you feel better, little girl, if they was pushed outta windows?"

    http://www.moviewavs.com/TV_Shows/Al...he_Family.html

  4. #4
    Join Date
    Feb 2012
    Location
    Aliquippa, Pennsylvania
    (Beaver County)
    Posts
    21
    Rep Power
    0

    Default Re: Mosin Nagant - Cracked stock

    Quote Originally Posted by PA Rifleman View Post
    Crack runs parallel to the barrel, right? Not much chance that's anything more than cosmetic. That's a laminated stock and should have a transverse bolt passing right through that crack anyway.
    Correct and correct, the bolt is flush with that square notch where theaction bolts in.


    Guess I'll shoot it bit and keepa close eye on it.

  5. #5
    Join Date
    Dec 2006
    Location
    ..- -. .. - . -.. ... - .- - . ...
    Posts
    2,822
    Rep Power
    69394

    Default Re: Mosin Nagant - Cracked stock

    Quote Originally Posted by tuxie555 View Post
    Correct and correct, the bolt is flush with that square notch where theaction bolts in.


    Guess I'll shoot it bit and keepa close eye on it.
    Aside from cosmetics, I wouldn't sweat it. Like, at all. In addition to the rear lug, that should have an extra bolt through the wrist that hardwood stocks lack.

    If you choose to swap it out for another stock, PM me. Those plywood stocks are pretty good for accuracy and durability.
    Gloria: "65 percent of the people murdered in the last 10 years were killed by hand guns"
    Archie Bunker: "would it make you feel better, little girl, if they was pushed outta windows?"

    http://www.moviewavs.com/TV_Shows/Al...he_Family.html

  6. #6
    Join Date
    Feb 2012
    Location
    Aliquippa, Pennsylvania
    (Beaver County)
    Posts
    21
    Rep Power
    0

    Default Re: Mosin Nagant - Cracked stock

    sounds good. Going to see if I can get to the range one day after work..

  7. #7
    Join Date
    Jun 2007
    Location
    Mount Bethel, Pennsylvania
    (Northampton County)
    Posts
    19
    Rep Power
    0

    Default Re: Mosin Nagant - Cracked stock

    Allot of those stocks were put on as replacements, and MAY have been tightened up wrong or action may need some shimming. Go over to surplusrifleforum and CK their MN section stickies, you can learn allot there.

    These are great guns for the money and most have decent accuracy, even with dark, worn bores and cheap surplus ammo. I have 34 Mosin Nagants of different flavors!
    USAF Crewchief C-141A Starlifter '75-'79
    God is my Pilot
    '70 W-31 Olds
    Fight Crime- Shoot Back!!

  8. #8
    Join Date
    Jan 2009
    Location
    Exton, Pennsylvania
    (Chester County)
    Posts
    310
    Rep Power
    513194

    Default Re: Mosin Nagant - Cracked stock

    $25 for a stock here:

    https://www.buymilsurp.com/stock-use...t-p-42673.html

    Yeah, its not a lammy. But if the lammy you have doesn't work out.

  9. #9
    Join Date
    Sep 2009
    Location
    nextdoor, Pennsylvania
    (Montgomery County)
    Posts
    147
    Rep Power
    17145771

    Default Re: Mosin Nagant - Cracked stock

    I have a few Nagants of different types and My advice would be to just shoot it and enjoy it. In my HMO the rifle and the surplus ammo are the best BANG for the buck you will find today..........

  10. #10
    Join Date
    Jan 2007
    Location
    Morrisville, Pennsylvania
    (Bucks County)
    Posts
    216
    Rep Power
    1640

    Default Re: Mosin Nagant - Cracked stock

    Glue it and clamp it and shoot it .

Page 1 of 2 12 LastLast

Similar Threads

  1. m44 mosin nagant stock
    By ••SpraynPray•• in forum General
    Replies: 17
    Last Post: August 2nd, 2008, 08:48 AM
  2. Need new stock for Mosin/Nagant M98
    By Brown-Bear in forum General
    Replies: 2
    Last Post: January 19th, 2008, 09:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •