Share Deals on Guns Ammo Accessories Here

**Emptymag** · June 17th, 2019, 08:23 PM

No assembly required
.224 Valkyrie
with 15'' Slim M-LOK & Custom PEPPER BRAKE
CLOSEOUT
Was $399
Now $149 & Free Shipping

www.combatarmory.com

NO Assembly Required

Barrel Length: 22"
Gas System: Rifle Length
Barrel Profile: Medium Contour
Barrel Material: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 1/2x28
Chamber: .224 Valkyrie
Twist Rate: 1:7
Barrel Extension: M4 Feed Ramp
Gas Block Type: .750 Low-profile Gas Block
Muzzle Device: Pepper Brake
Upper Receiver Material: Forged 7075 T6
Upper Receiver Style: M4 Mil-Std
Upper Receiver Finish: Type III Anodizing
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: Free Float
Handguard Style: M-Lok Thin Rail
Handguard Length: 15"
no BCG or Charging handle

**Delkal** · June 17th, 2019, 08:24 PM

Originally Posted by alpacaheat

Good TODAY ONLY...

$3 off any ebay purchase with code PROMO3

I just used it, works.

Pretty crappy coupon.................EXCEPT I ORDERED SOMETHING FOR $4 THIS MORNING!

**HKusp 45** · June 17th, 2019, 09:39 PM

Originally Posted by Emptymag

No assembly required
.224 Valkyrie
with 15'' Slim M-LOK & Custom PEPPER BRAKE
CLOSEOUT
Was $399
Now $149 & Free Shipping

www.combatarmory.com

NO Assembly Required

Barrel Length: 22"
Gas System: Rifle Length
Barrel Profile: Medium Contour
Barrel Material: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 1/2x28
Chamber: .224 Valkyrie
Twist Rate: 1:7
Barrel Extension: M4 Feed Ramp
Gas Block Type: .750 Low-profile Gas Block
Muzzle Device: Pepper Brake
Upper Receiver Material: Forged 7075 T6
Upper Receiver Style: M4 Mil-Std
Upper Receiver Finish: Type III Anodizing
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: Free Float
Handguard Style: M-Lok Thin Rail
Handguard Length: 15"
no BCG or Charging handle

The fuck just what I need ..... Another caliber

**internet troll** · June 17th, 2019, 10:04 PM

Originally Posted by Emptymag

CHEESE AND FREAKIN' RICE!!!

You can have an AR15 pistol for $224!!!
Buy a $29 stripped lower at PSA and add this...

Combat Armory

JUST ADD LOWER RECEIVER

FATHERS DAY ONLY BUNDLE
EVERYTHING IS INCLUDED TO BUILD
YOUR FIREARM JUST ADD YOUR FAVORITE LOWER RECEIVER

COMPLETE 7.5 INCH UPPER SLIM MLOK KIT
COMPLETE LOWER PARTS KIT
COMPLETE PISTOL BUTT STOCK KIT
CHARGING HANDLE
MIL-SPEC FULL AUTO B.C.G
WAS $429
NOW $195
SUPER BUNDLE PRICING ONLY FOR FATHER'S DAY !

I just want to make sure I understand this right. All I need to do is get a stripped lower and I am set

Thanks,

Troll

**GOYABEAN** · June 17th, 2019, 10:33 PM

Originally Posted by internet troll

I just want to make sure I understand this right. All I need to do is get a stripped lower and I am set

Thanks,

Troll

Minus bullets and possibly assembly

and magazine.

**internet troll** · June 17th, 2019, 10:52 PM

Originally Posted by GOYABEAN

Minus bullets and possibly assembly

and magazine.

Awesome, Thank you.

**Emptymag** · June 17th, 2019, 10:59 PM

Originally Posted by internet troll

I just want to make sure I understand this right. All I need to do is get a stripped lower and I am set

Thanks,

Troll

Correct.
And some form of optic - be it back up iron sights, fixed sight, or red rot/magnified optic.
Sometimes packages may include those, but "sights" are a very personal choice, so they are typically not included.

**internet troll** · June 17th, 2019, 11:06 PM

Originally Posted by Emptymag

Correct.
And some form of optic - be it back up iron sights, fixed sight, or red rot/magnified optic.
Sometimes packages may include those, but "sights" are a very personal choice, so they are typically not included.

Good to know, thank you.

**Emptymag** · June 17th, 2019, 11:14 PM

Originally Posted by internet troll

Good to know, thank you.

And bookmark this link that RenoV8 posted before in case you decide to put a brace on it.
https://skidtactical.com/product-cat...shockwave-kak/

There are half a dozen options for arm braces, but this is one of the least expensive and proven brands. (KAK Shockwave Blade)
You COULD just get the "Blade" and slip it on the buffer tube that came with that kit, but for best results, I suggest the KAK dimpled buffer tube - the dimples allow you to secure it in the length you want and it won't slip/move.

You wouldn't need to buy a different spring or buffer (or castle nut/end plate) - all you would need is:
The tube
and the Blade arm brace

(all of this is up to you - just noting a very affordable and decent/popular product)

**internet troll** · June 17th, 2019, 11:17 PM

Originally Posted by Emptymag

And bookmark this link that RenoV8 posted before in case you decide to put a brace on it.
https://skidtactical.com/product-cat...shockwave-kak/

There are half a dozen options for arm braces, but this is one of the least expensive and proven brands. (KAK Shockwave Blade)
You COULD just get the "Blade" and slip it on the buffer tube that came with that kit, but for best results, I suggest the KAK dimpled buffer tube - the dimples allow you to secure it in the length you want and it won't slip/move.

Bookmarked. Thanks again.