Results 1 to 10 of 12
Thread: German Mauser k98 value?
Hybrid View
-
October 10th, 2012, 12:32 AM #1Junior Member
- Join Date
- Jul 2011
- Location
-
Dallastown,
Pennsylvania
(York County) - Posts
- 23
- Rep Power
- 0
German Mauser k98 value?
So a little while back i got a German Mauser k98 and have been trying to figure out what its worth. It has dou 44 written on the receiver along with German Nazi proof marks. is an 8 millimeter. the sad part is that the stock has been cut down and sporterized. it has original sites on it and is in pretty decent condition. who ever had cut down the stock did a pretty nice job of it and and filled in the hole where the original sling would have went. all the numbers are matching except for the trigger guard. Also this Mauser doesn't have any import markings.
For trading for my 4 year old diamond archery bow I think I got a pretty good deal. Considering I got this German K 98 + a Taurus .17 model 172 pump action, modeled off the old winchesters, which apparently is a hard to find gun. And was nib when i got it.
Any help is appreciated in advance!
-
October 10th, 2012, 09:58 AM #2
Re: German Mauser k98 value?
Without pictures?
I'd say $200 to $250 max.
Restored, again without pics, closer to $400-$425.
Wideners currently has shooter grades starting at $329 in full military furniture.
Be sure to check under the handguard if still present for the import stamp, years ago importers were stamping under the wood.
I found a "non-import" 30 Carbine at the last show I was at and after asking to remove it from the stock, found the Springfield Sporters import stamp under the wood.
I've seen plenty of these locally since Springfield Sporters was/is only 10 miles from me.
-
October 10th, 2012, 02:29 PM #3Junior Member
- Join Date
- Jul 2011
- Location
-
Dallastown,
Pennsylvania
(York County) - Posts
- 23
- Rep Power
- 0
Re: German Mauser k98 value?
I took the stock off and found no import marks and nowhere that they would have been and someone would have taken them off. i took some pictures but for some reason it kept coming up with an error. i will try again later.
-
October 10th, 2012, 06:44 PM #4
Re: German Mauser k98 value?
I couldn't lay my hands on my copy of Guns of the Third Reich, but found this with a quick search:
www.radix.net/~bbrown/codes_rifle.html
German WW2 Ordnance Codes for Military Rifles
German WW2-era military rifles usually have markings on the receiver, barrel, rear sight, and stock, from which one can get some information about the history of the piece.
The top of the receiver (that part of the barrel into which the bolt shoves the cartridge) usually has a 2- or 3-letter code with a number below it. (Early codes were sometimes numerical or a combination of letters and numbers.) The code indicates the manufacturer of the receiver, and the number below the code is the year in which the part was made. Other markings are usually either proof marks (indicating that the barrel was test fired with cartridges loaded with a larger charge of gunpowder than normally used to ensure safety) or Waffenamt (ordnance department) markings, indicated by the symbol of an eagle with outstreached wings with the letters WaAxxx below, where xxx is a 2- or 3-digit number indicating which Waffenamt accepted the piece.
The following table lists the ordnance codes found in Mauser Bolt Rifles by L. Olson (third edition, F. Brownell & Son, 1976, 12th printing 1991). They can be used to get some historical information about your particular rifle.
These codes may apply to German pistols of the same era, but I have no information about that.
As always, I'm not responsible for any inaccuracies in Olson's data, just for the transcription. Please report any errors to me.
German WWII Rifle Ordnance Codes
Code Manufacturer
ar Mauser-Werke AG, Werk Borsigwalde, Berlin-Borsigwalde, Eichborndamm
ax Feinmechanische Werke GmbH, Erfurt, Altonaerstr. 25
bcd Gustloff Werke, Werk Wiemar, Weimar
bcd/ar Dual code; denotes manufacture jointly by Gustloff Werke in Weimar, and Mauser-Werke AG, Berlin
bnz Steyr-Daimler-Puch AG, Werk Steyr, Steyr, Austria
byf Mauser-Werke AG, Oberndorf a./N
ce J.P. Sauer & Sohn, Suhl
dot Waffenwerke Bruenn AG, Brno, Czechoslovakia
dou Waffenwerke Bruenn AG, Werk Bystrica
duv Berlin-Luebecker Maschinenfabriken, Werk Luebeck
svw Late code for Mauser-Werke AG, Oberndorf a./N
swp Late code for Waffenwerke Bruenn AG, Brno, Czechoslovakia
S/27 Erfurter Maschinenfabrik (ERMA); came under same management as Feinmechanische Werke GmbH
S/27G Erfurter Maschinenfabrik (ERMA); came under same management as Feinmechanische Werke GmbH
S/42 Mauser-Werke AG, Oberndorf a./N, early code
S/42G Mauser-Werke AG, Oberndorf a./N, production in 1935
S/42K Mauser-Werke AG, Oberndorf a./N, production in 1934
S/147 J.P. Sauer & Sohn, Suhl
S/147G J.P. Sauer & Sohn, Suhl
S/147K J.P. Sauer & Sohn, Suhl
S/237 Berlin-Luebecker Maschinenfabriken, Werk Luebeck
S243 Mauser-Werke AG, Werk Borsigwalde, Berlin-Borsigwalde, Eichborndamm
S243G Mauser-Werke AG, Werk Borsigwalde, Berlin-Borsigwalde, Eichborndamm
27 Erfurter Maschinenfabrik (ERMA); came under same management as Feinmechanische Werke GmbH
42 Mauser-Werke AG, Oberndorf a./N, early code
147 J.P. Sauer & Sohn, Suhl
237 Berlin-Luebecker Maschinenfabriken, Werk Luebeck
243 Mauser-Werke AG, Werk Borsigwalde, Berlin-Borsigwalde, Eichborndamm
337 Gustloff Werke, Werk Weimar, Weimar
660 Steyr-Daimler Puch, Steyr, Austria
945 Waffenwerke Bruenn AG, Brno, Czechoslovakia
-
October 11th, 2012, 02:07 AM #5Junior Member
- Join Date
- Jul 2011
- Location
-
Dallastown,
Pennsylvania
(York County) - Posts
- 23
- Rep Power
- 0
Re: German Mauser k98 value?
heres two pictures of the gun
-
October 11th, 2012, 08:23 AM #6
Re: German Mauser k98 value?
IMO, you have a $250 hunting rifle as it sits.
That said, if you can find all original wood and hardware(bands) you will have a nice K98 to display.
Unfortunately, the replacement stock will still hurt the value, I'll still say it would be in the $450 to $500 range (possibly a bit more to someone just looking to fill a gap in their collection) even when restored in original wood.
The replacement stock and metal would make it mismatched and even without import markings, the value is ruined IMO due to the sporterization.
You will have to decide if spending the extra money on wood is worth it to you, I believe it would be.
If it were all original, a DOU in the shape yours appears to be in would be about $1200-1500 for a non-import. Sorry.
-
October 11th, 2012, 08:17 AM #7
Re: German Mauser k98 value?
Similar Threads
-
Mauser K98 - German
By DTMiata in forum GeneralReplies: 0Last Post: May 4th, 2009, 01:19 PM -
German mauser
By optionwiz in forum GeneralReplies: 8Last Post: April 16th, 2008, 02:32 PM
Bookmarks