Results 1 to 9 of 9
Thread: Finally took my M&P to the range
-
October 3rd, 2012, 10:45 AM #1
Finally took my M&P to the range
So this morning I finally took my M&P to the range. Right away I liked it. Good grip, good grouping. Even firing as fast as I could I still got groups of three or four together. I am surprised how well this gun shoots. I think I shoot better with it than I do with my glocks haha. No problems at all. I should have taken more ammo though :-(. However it started to rain so I don't think I would have stayed longer.
-
October 4th, 2012, 08:42 PM #2
Re: Finally took my M&P to the range
I have the M&Pc, and I am very impressed with it. It has the apex trigger kit in it, which I highly recommend. IMO, it is a great gun. Good luck!
-
October 5th, 2012, 11:10 AM #3Member
- Join Date
- Dec 2011
- Location
-
SE PA,
Pennsylvania
(Montgomery County) - Posts
- 56
- Rep Power
- 586
-
October 5th, 2012, 12:31 PM #4
Re: Finally took my M&P to the range
Which Apex kit do you have, what is the weight of the trigger now?
I'm very interested in installing one for my wife.
-
October 5th, 2012, 01:20 PM #5
Re: Finally took my M&P to the range
Nice, I learned how to shoot a pistol with my M&P 9. After 2000 rounds I can keep all my shots inside a paper plate at 7 and 15 yards. The last 1400 rounds have been Tula and she has eaten everything I fed her without a complaint. Only minor issue I had was the front dot falling out 400 rounds in. I replaced the stock sights with Trijicon Night Sights and haven't looked back. Except for a Tactical Light I plan on keeping this pistol stock as it's perfect the way it is IMO.
-
October 6th, 2012, 08:50 AM #6Member
- Join Date
- Dec 2011
- Location
-
SE PA,
Pennsylvania
(Montgomery County) - Posts
- 56
- Rep Power
- 586
Re: Finally took my M&P to the range
-
October 6th, 2012, 02:40 PM #7Junior Member
- Join Date
- Sep 2012
- Location
-
Southern Chester County,
Pennsylvania
(Chester County) - Posts
- 17
- Rep Power
- 0
Re: Finally took my M&P to the range
I bought an M&P 45 ACP this week and took it to the range this morning. I was dead on at 7 and 20 yards. I tried 200 LSWC and 200 LRNFP, mixed brass, 4.9 grains of WST. No problems with either load.
Does anyone know if the above load makes major in IDPA? I know I can back it off some and still shoot SSP, but I'd also like to shoot CDP too.
Good luck with your M&P.
-
October 6th, 2012, 03:03 PM #8
Re: Finally took my M&P to the range
From the IDPA Rulebook.
IDPA Power Floor:
The goal is to compete with “service type” ammunition, not lightfloors will be in effect:
target ammunition. Therefore, the following minimum power
SSP - 125,000velocity.
ESP - 125,000
CDP - 165,000
ESR - 165,000
SSR - 125,000
Calculate power floor by multiplying the bullet weight by the
muzzle velocity. You will need a chronograph to verify muzzle
http://www.idpa.com/Documents/IDPARuleBook2005.pdf
-
October 6th, 2012, 05:48 PM #9Junior Member
- Join Date
- Sep 2012
- Location
-
Southern Chester County,
Pennsylvania
(Chester County) - Posts
- 17
- Rep Power
- 0
Re: Finally took my M&P to the range
Thanks for the response.
I don't have a chronograph. I was hoping someone was using a load similar to mine and could tell me if it was achieving 825 fps or more. Excluding barrel differences and other factors, I would no if I am close or not in the park.
Similar Threads
-
Finally got my mother to the range
By EvoRich in forum GeneralReplies: 0Last Post: November 21st, 2010, 06:32 PM -
Got to the range finally with my Mosin
By Elmar in forum RiflesReplies: 10Last Post: March 27th, 2010, 08:29 AM -
Finally got to the range with my new set up
By Red Dawn 4Life in forum Gun PicturesReplies: 1Last Post: March 24th, 2010, 11:22 PM -
Wife finally goes to the range....
By wsmallri in forum GeneralReplies: 5Last Post: April 11th, 2009, 10:27 PM -
Finally...it's in!! *CZ-85B and Range photos*
By andrewjs18 in forum GeneralReplies: 9Last Post: October 6th, 2008, 07:08 AM
Bookmarks