Results 1 to 10 of 16
-
September 22nd, 2012, 09:52 PM #1
Lonewolf G20 6.6'' Threaded Barrel Review
To truly realize the potential of hot 10mm rounds you really need a barrel 5.5'' or longer in my opinion. With that in mind, I picked up the LWD 6.6'' 10mm threaded barrel for my Gen4 G20.
When the barrel first arrived I threw it in the gun and noticed a problem; it was way too tight round the lugs and hood. The gun wouldn't cycle properly due to the amount of friction from the tight lockup. I called LWD and they told me to send it in with my slide, which I did. Fast forward two weeks and I had it back in my hands and was running rounds through it.
Pros:
-100% reliable with all ammo tried thus far
-Standard 9/16x24 threading allowing for use with most popular suppressors
-Heat treated 416 stainless steel
-Theoretically a drop in part (I have several other LWD barrels, they worked out of the box)
-Standard rifling allows the worry free use of lead reloads (more on this in the video)
-Lifetime warranty
-Extra velocity compared to the stock barrel
-Fully supported chamber (no evidence to any type of deformation/damage to the fired cases)
-Polished feed ramp
Cons:
-Mine didn't fit properly out of the box
-I'm not a fan of the logo; I'd much prefer something less obvious like KKM and Stormlake do
Here's a video of some shooting, a demonstration of the chamber support vis-à-vis the Gen4 factory barrel, and a chronograph test using Underwood 165gr Gold Dot rounds:
Chrono Data:
Factory barrel:
Underwood 165gr Gold Dots: 1418fps, 736 ft/lbs energy
LWD barrel:
Underwood 165gr Gold Dots: 1559fps, 889 ft/lbs energy
-
September 23rd, 2012, 05:06 PM #2
Re: Lonewolf G20 6.6'' Threaded Barrel Review
Nice write-up!
I successfully fought the urge to neg-rep you for the Niners hat
Thanks for chrono'ing out of both barrels.
Regards,
Bones
-
September 23rd, 2012, 05:13 PM #3
Re: Lonewolf G20 6.6'' Threaded Barrel Review
have you messed around with the "tactical" length barrel?
Montani Semper Liberi
-
September 23rd, 2012, 07:52 PM #4Senior Member
- Join Date
- Feb 2012
- Location
-
Easton,
Pennsylvania
(Northampton County) - Age
- 33
- Posts
- 252
- Rep Power
- 16924
Re: Lonewolf G20 6.6'' Threaded Barrel Review
Nice write up and review.
It's amazing what a few extra inches will do...
-
September 23rd, 2012, 07:55 PM #5
-
September 23rd, 2012, 10:28 PM #6Senior Member
- Join Date
- Feb 2012
- Location
-
Easton,
Pennsylvania
(Northampton County) - Age
- 33
- Posts
- 252
- Rep Power
- 16924
-
September 23rd, 2012, 11:18 PM #7
-
September 23rd, 2012, 11:19 PM #8
-
September 24th, 2012, 08:38 PM #9
-
September 25th, 2012, 11:05 AM #10
Similar Threads
-
Threaded Barrel for a S&W M&P 9mm
By ChamberedRound in forum GeneralReplies: 7Last Post: September 26th, 2011, 10:16 PM
Bookmarks