Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Sep 2009
    Location
    POCONO MOUNTAINS, PENNSYLVANIA, Pennsylvania
    (Monroe County)
    Age
    68
    Posts
    2,998
    Rep Power
    21474849

    Unhappy Glock 19 Extended slide release

    Cant get the larger of the two pins out,Is there a trick to this,Am I missing something to do other than take it to a Glock Armorer ? I changed my sights,Mag release and extended slide take down no problem,Just cant get the larger pin to move,I am pushing left to right in case the pin has a shoulder,Help !

  2. #2
    Join Date
    Jun 2009
    Location
    Felton, Pennsylvania
    (York County)
    Age
    31
    Posts
    948
    Rep Power
    8822

    Default Re: Glock 19 Extended slide release

    I know when I installed the extended slide release on my Glock 27 those pins were a little difficult to get out. They needed a little more persuading than the others. It shouldn't be too difficult though, hopefully someone can give you another tip/trick.

    GB
    Certified Glock Armorer

  3. #3
    Join Date
    Jan 2010
    Location
    West Chester, Pennsylvania
    (Chester County)
    Posts
    1,271
    Rep Power
    4019114

    Default Re: Glock 19 Extended slide release

    Try pushing right to left...
    Hoplophobia is funny

  4. #4
    Join Date
    Aug 2009
    Location
    Hughesville, Pennsylvania
    (Lycoming County)
    Posts
    565
    Rep Power
    479478

    Default Re: Glock 19 Extended slide release

    Looks like it's left to right..

    Skip to 3:10 in the vid.


  5. #5
    Join Date
    Sep 2009
    Location
    POCONO MOUNTAINS, PENNSYLVANIA, Pennsylvania
    (Monroe County)
    Age
    68
    Posts
    2,998
    Rep Power
    21474849

    Default Re: Glock 19 Extended slide release

    Quote Originally Posted by kbcobra26 View Post
    Looks like it's left to right..

    Skip to 3:10 in the vid.

    Glockmeister video says and shows left to right,but cant budge the larger of the pins,I dont think Glock would have put loctite on as a joke although It IS that tough !

  6. #6
    Join Date
    Mar 2011
    Location
    mechanicsburg, Pennsylvania
    (Cumberland County)
    Posts
    1,064
    Rep Power
    1657715

    Default Re: Glock 19 Extended slide release

    these can be tough the first couple of times. this pin has two grooves cut into it. a good punch and a light hammer can help, don,t go crazy! also jiggle the slide stop around as you try. go left to right.

  7. #7
    Join Date
    Nov 2010
    Location
    Pennsburg, Pennsylvania
    (Montgomery County)
    Age
    41
    Posts
    685
    Rep Power
    45366

    Default Re: Glock 19 Extended slide release

    Quote Originally Posted by red dog View Post
    these can be tough the first couple of times. this pin has two grooves cut into it. a good punch and a light hammer can help, don,t go crazy! also jiggle the slide stop around as you try. go left to right.
    Wiggling the existing slide release while trying to push out the pin is the way to go. I've swapped out 6 of these so far. The little grooves in the factory slide release get caught up. Also, I never use a hammer when trying to take Glock pins out. Usually, just pushing them with a punch will do the trick. Having to use a hammer means you may be caught up on something which could get damaged by whacking on the pin.
    I would rather die in a shootout than get assassinated in a "gun free zone"

  8. #8
    Join Date
    Dec 2010
    Location
    Easton, Pennsylvania
    (Northampton County)
    Posts
    1,272
    Rep Power
    5551607

    Default Re: Glock 19 Extended slide release

    Marine Division Two If you are having a problem getting it done stop down and see me .your not that far away. It only takes a couple of minutes I will show
    you how to do it no charge,Brian / EFR
    www.EastonFirearmsRefinishing.com Owner/Operator, NRA Pistol Instructor

  9. #9
    Join Date
    Jun 2009
    Location
    ✠ Ēǻζţ ŞŧЯǿŪđβũЯģ, Pennsylvania
    (Monroe County)
    Posts
    5,606
    Rep Power
    1580202

    Default Re: Glock 19 Extended slide release

    Quote Originally Posted by JasonK007 View Post
    Wiggling the existing slide release while trying to push out the pin is the way to go.
    Bingo! Absolutely 100% your answer right here! Forward and back

  10. #10
    Join Date
    Sep 2009
    Location
    POCONO MOUNTAINS, PENNSYLVANIA, Pennsylvania
    (Monroe County)
    Age
    68
    Posts
    2,998
    Rep Power
    21474849

    Smile Re: Glock 19 Extended slide release

    BINGO ! Wiggling the slide release was the ticket,It came out with a little push,all the videos I found do not tell you to wiggle the release,Thank you ALL for the info,Once again the members came thru for me,Happy Shooting ! And reps sent.

Page 1 of 2 12 LastLast

Similar Threads

  1. Glock 21 Slide release tight
    By Saber in forum Pistols
    Replies: 9
    Last Post: September 18th, 2011, 12:07 AM
  2. Glock slide release... am I just weak lol?
    By FCRPhila in forum Pistols
    Replies: 67
    Last Post: May 26th, 2010, 08:35 PM
  3. Trying like hell to find an extended slide release for HK USP
    By son of the revolution in forum General
    Replies: 6
    Last Post: December 9th, 2009, 04:57 PM
  4. Glock Extended slide release ?
    By MARINE DIVISION TWO in forum General
    Replies: 13
    Last Post: November 13th, 2009, 04:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Local gun shops | Local shooting ranges | Philadelphia Shooting Ranges | Philadelphia Gun Shops | Pittsburgh Shooting Ranges | Pittsburgh Gun Shops