Results 1 to 5 of 5
Thread: SR9 striker problem
-
May 28th, 2012, 09:10 PM #1Senior Member
- Join Date
- Mar 2007
- Location
-
Westport,
Pennsylvania
(Clinton County) - Posts
- 316
- Rep Power
- 20
SR9 striker problem
I have a SR9 that I bought about 3 years ago, the tab on the bottom of the striker has broken off 3 times and ruger replaced it every time but I wonder what the problem is?. I dey fire about 10 times a day with each hand {total of 20] cause it is hard to get to a range and ammo isn't cheap. The owner's manual says dry firing is OK but could 20 a day be excessive and causing the breakages ?.
-
May 28th, 2012, 09:36 PM #2Senior Member
- Join Date
- Apr 2011
- Location
-
SomewhereInLehigh,
Pennsylvania
(Lehigh County) - Posts
- 421
- Rep Power
- 413865
Re: SR9 striker problem
Do you dry fire with an empty magazine? If it's the same as the SR9c, the manual says not to dryfire without an empty magazine due to the mag-disconnect.
You might want to get snap caps. Get the one with plastic as primer. It will "cushion" your striker.
-
May 29th, 2012, 07:51 AM #3Senior Member
- Join Date
- Mar 2007
- Location
-
Westport,
Pennsylvania
(Clinton County) - Posts
- 316
- Rep Power
- 20
Re: SR9 striker problem
I always have the mag in place and an aluminum snapcap.
-
May 30th, 2012, 03:09 PM #4Grand Member
- Join Date
- May 2010
- Location
-
Midwest City,
Oklahoma
- Posts
- 2,224
- Rep Power
- 1024
Re: SR9 striker problem
I have a SR9C and I dry fire it right now I have no problem with the bottom of the striker breaking. I do use a snap cap. But my mag disconnect does not work the gun will fire with mag out. Every thing other then that is fine.
Last edited by Neko456; May 30th, 2012 at 03:11 PM.
-
May 31st, 2012, 07:38 AM #5
Re: SR9 striker problem
I have an SR9 and had the exact same thing happen after taking a pistol class. We dry fired extensively and I always had an empty mag in. I had Ruger replace it, then upgraded to a Glock. The SR9 been sitting in its case ever since.
Similar Threads
-
If you dropped your striker pistol
By beefcakeb0 in forum PistolsReplies: 16Last Post: April 26th, 2010, 01:15 PM -
Looking to add a Striker to the collection
By Taz in forum GeneralReplies: 28Last Post: February 4th, 2009, 12:16 PM -
rebarreling a striker
By hjay1968 in forum GeneralReplies: 0Last Post: January 11th, 2009, 02:36 PM -
Striker covers?
By Mastiff4570 in forum GeneralReplies: 3Last Post: June 9th, 2008, 12:39 PM
Bookmarks