Results 1 to 10 of 18
Thread: Taurus PT1911 First Shots
-
April 19th, 2012, 02:01 PM #1
Taurus PT1911 First Shots
So I got my Taurus PT1911 yesterday and went to the range today. Put 250 rounds down range and was almost flawless. I had 1 FTFeed and 1 FTE. The FTF was an ammo problem and I suspect the FTE was as well.
I was shooting Blazer Clean Fire for most of the day and then ran a box of Tula. The Blazer was nice. It really is "clean fire". There was very little powder around the muzzle. When I switched to the Tula, you could see the difference.
I made a short video. In it you can see the Blazer round that FTF'd
Last edited by bigdawgbeav; April 19th, 2012 at 02:13 PM.
DISCOUNTS - Steel Target Paint: beaverje10 (10% off) | Wiland USA: jbeaver05 (5% off)
-
April 19th, 2012, 02:22 PM #2Banned
- Join Date
- Apr 2010
- Location
-
Dickson City,
Pennsylvania
(Lackawanna County) - Age
- 41
- Posts
- 1,464
- Rep Power
- 0
Re: Taurus PT1911 First Shots
My boyfriend says: "Buy new magazines, because the factory ones are shit."
He has over a dozen mags for his Taurus, but never uses the factory ones.
-
April 19th, 2012, 02:26 PM #3
Re: Taurus PT1911 First Shots
DISCOUNTS - Steel Target Paint: beaverje10 (10% off) | Wiland USA: jbeaver05 (5% off)
-
April 19th, 2012, 04:57 PM #4
Re: Taurus PT1911 First Shots
I was thinking of picking one up. Anything other than the mags being crap worth knowing about?
Your web muscles do not frighten me.
-
April 19th, 2012, 05:13 PM #5
Re: Taurus PT1911 First Shots
That was the exact OPPOSITE experience I had with my PT1911. It was an awesome gun while I had it, but the factory mags were the only 8 rounders that would feed HP's reliably. I tried 4 of the most popular brands of 8 rounders before learning that factory is best with the PT1911.
-
April 19th, 2012, 06:24 PM #6
-
April 19th, 2012, 06:28 PM #7Grand Member
- Join Date
- Dec 2010
- Location
-
back to Port Charlotte,
Florida
- Age
- 60
- Posts
- 5,483
- Rep Power
- 3627622
Re: Taurus PT1911 First Shots
Got 4 PT 1911's in .45 and one in 9mm. Every mag has worked perfectly and the trunkload of Taurus factory mags I bought extra all work perfectly, as well. Taurus 1911's are not mil spec, so I want the mags for it that are designed for it. A lot of people blame the mag for a problem that isn't a mag problem, but to each his own.
BCM and Glock...for a bigger pile of 'cold dead hands' brass.
-
April 19th, 2012, 07:47 PM #8
Re: Taurus PT1911 First Shots
i have 3 generic 1911 mags i got on ebay. we'll see how they work.
going to the oaks show in may and will look for more.
it's all about testing.DISCOUNTS - Steel Target Paint: beaverje10 (10% off) | Wiland USA: jbeaver05 (5% off)
-
April 19th, 2012, 07:50 PM #9
Re: Taurus PT1911 First Shots
DISCOUNTS - Steel Target Paint: beaverje10 (10% off) | Wiland USA: jbeaver05 (5% off)
-
April 19th, 2012, 11:13 PM #10Banned
- Join Date
- Apr 2010
- Location
-
Dickson City,
Pennsylvania
(Lackawanna County) - Age
- 41
- Posts
- 1,464
- Rep Power
- 0
Similar Threads
-
My new to me, used Taurus PT1911
By PisnNapalm in forum Gun PicturesReplies: 31Last Post: January 13th, 2012, 02:02 PM -
Taurus PT1911-- in 40s&w, 9mm
By XD45 in forum GeneralReplies: 11Last Post: April 25th, 2008, 10:25 AM -
Taurus PT1911
By aubie515 in forum GeneralReplies: 5Last Post: January 7th, 2007, 10:40 PM
Bookmarks