Results 1 to 8 of 8
Thread: new flash suppressor
-
January 20th, 2012, 01:28 PM #1Junior Member
- Join Date
- Jan 2012
- Location
-
bear creek twp.,
Pennsylvania
(Luzerne County) - Posts
- 4
- Rep Power
- 0
new flash suppressor
Hello to everyone,
I am new to this forum & looking for some input on making a new flash suppresser for my m&p 15-22. Does anyone know if anybody makes a tap for 1/2x28 tpi or am I going to have to use my lathe to make these threads?
looking forward to any input on this.
Thanks lonnie
-
January 20th, 2012, 01:40 PM #2
-
January 20th, 2012, 03:47 PM #3Junior Member
- Join Date
- Jan 2012
- Location
-
bear creek twp.,
Pennsylvania
(Luzerne County) - Posts
- 4
- Rep Power
- 0
Re: new flash suppressor
Thanks for the tip. They have it but they want $190 for it. That's a bit much for me will do a little more lookin around maybe someone else will have one cheaper. Just thought it might be little easier with the tap.
Thanks for your help
-
January 20th, 2012, 05:34 PM #4
Re: new flash suppressor
From McMaster-Carr (http://www.mcmaster.com/)
1/2"-28 taper, plug and bottoming taps (1 each style, for a total of 3 taps) $34.11 Part number 2521A215
If you only need one style, they are $13.89 each.
If you need a spiral point tap, 25705A65 $26.35
All are high speed steel.
Hope that helps.
-
January 20th, 2012, 07:50 PM #5
-
January 20th, 2012, 08:34 PM #6
Re: new flash suppressor
Check Brownells.
http://www.brownells.com/.aspx/pid=6...SUPPRESSOR-TAPRon USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
January 20th, 2012, 09:20 PM #7Junior Member
- Join Date
- Jan 2012
- Location
-
bear creek twp.,
Pennsylvania
(Luzerne County) - Posts
- 4
- Rep Power
- 0
Re: new flash suppressor
Thanks for the info fellows. I'm going to get one ordered next week. I just got my new barrel nut that will accept AR free float forend-hand guard this week, so it looks like the chips are going to be flying this weekend on my first attempt on making a free float guard. hopefully I nail it on the first try. Have any of you used dura coat & if so is it as good as they make it sound?
-
January 21st, 2012, 06:54 AM #8
Re: new flash suppressor
Travers Tool Company is a company I've been dealing with for tooling. Dies in that size are < $30 (17-032-283). Tap (14-032-281) around $17. Their catalog has everything plus and their customer service has been great.
Similar Threads
-
Pin/Weld Flash Suppressor- SE PA
By Hooligan in forum GunsmithsReplies: 1Last Post: July 6th, 2011, 05:03 PM -
AR-15 flash suppressor removal
By pdelcasino in forum GunsmithingReplies: 6Last Post: April 4th, 2010, 12:10 AM -
AR Barrell/flash suppressor question
By psion_008 in forum GeneralReplies: 1Last Post: November 3rd, 2009, 06:44 PM -
Pin and Weld Flash Suppressor on an AR-15
By SuperMoose in forum GeneralReplies: 1Last Post: May 26th, 2009, 11:59 AM -
NEW Mini-30 Flash Suppressor (Delaware County)
By andrewjs18 in forum GeneralReplies: 1Last Post: December 17th, 2008, 12:56 PM
Bookmarks