Results 1 to 10 of 12
Thread: Help Beretta 92a1 trigger issue
-
January 7th, 2012, 10:23 PM #1Junior Member
- Join Date
- Jan 2012
- Location
-
Shillington,
Pennsylvania
(Berks County) - Posts
- 21
- Rep Power
- 0
Help Beretta 92a1 trigger issue
So I am taking my 92a1 to range tomorrow for the first time. I was just taking it apart and cleaning it. The hammer was cocked and I pulled the trigger while I had it apart. Probably a bad move!
When I put it back together everything seemed great until I cocked it. I noticed there is a lot of play in the trigger now when the hammer is cocked and in SA. I remember it being firm before this happened.
Did I mess this thing up? Is there anyway to adjust this?
Thanks for the help and dealing with the new guy!
-
January 7th, 2012, 11:31 PM #2Senior Member
- Join Date
- Dec 2010
- Location
-
The Sticks
(Mercer County) - Posts
- 464
- Rep Power
- 2119
Re: Help Beretta 92a1 trigger issue
Does the hammer eventually fall with the long pull? If not, I wonder if you forgot to install the trigger bar spring, or it slipped out of the slot on the underside of the trigger bar... It's P/N 28 here:
http://www.brownells.com/.aspx/pid=0...2-Practice-Kit
If this spring is missing or not installed correctly, the trigger bar can't connect with the sear to push the sear forward, allowing the hammer to fall.
Maybe too what seems abnormal to you now is normal; even in SA, the 9x series guns have a pretty good amount of take-up till they trip the sear. Maybe next time you have her apart you might add a "D" main spring to improve the DA pull especially (lighter), and some improvement to the SA as well. Doing an action job yourself is easy, and my Beretta has a very sweet trigger by virtue of this "D" spring and action job I did. This fella has made a very nice set of videos concerning the 9x series pistols, and I bet you will find them helpful:
http://beretta92fs.com/index.html
Good luck!
-
January 8th, 2012, 12:03 AM #3Junior Member
- Join Date
- Jan 2012
- Location
-
Shillington,
Pennsylvania
(Berks County) - Posts
- 21
- Rep Power
- 0
Re: Help Beretta 92a1 trigger issue
Yep, the hammer does fall wih a full pull. I just Rember there being no give in SA. Now it feels like almost a centimeter give until the hammer falls when firing in SA
-
January 8th, 2012, 12:11 AM #4
Re: Help Beretta 92a1 trigger issue
That doesn't sound right. Mine has no slack at all in SA. Did you just buy it new? If so, take it back to the shop you bought it from and have them take a look.
-
January 8th, 2012, 12:16 AM #5Senior Member
- Join Date
- Dec 2010
- Location
-
The Sticks
(Mercer County) - Posts
- 464
- Rep Power
- 2119
Re: Help Beretta 92a1 trigger issue
-
January 8th, 2012, 12:21 AM #6Junior Member
- Join Date
- Jan 2012
- Location
-
Shillington,
Pennsylvania
(Berks County) - Posts
- 21
- Rep Power
- 0
Re: Help Beretta 92a1 trigger issue
It definitely doesn't feel right. I bought it a few months ago from cabelas. Been waiting to shoot it. Just never had time. I have a feeling I'll have to send it out.
-
January 8th, 2012, 01:02 AM #7Active Member
- Join Date
- Sep 2010
- Location
-
Trenton,
New Jersey
- Posts
- 173
- Rep Power
- 4815
-
January 8th, 2012, 01:25 AM #8Junior Member
- Join Date
- Jan 2012
- Location
-
Shillington,
Pennsylvania
(Berks County) - Posts
- 21
- Rep Power
- 0
Re: Help Beretta 92a1 trigger issue
I will post a video up tomorrow. I cant see what is causing this.
-
January 8th, 2012, 01:45 AM #9Banned
- Join Date
- Aug 2011
- Location
-
Peaceburgh,
Pennsylvania
(Allegheny County) - Posts
- 416
- Rep Power
- 0
-
January 8th, 2012, 07:58 AM #10
Similar Threads
-
Anyone Seen/Tried the New Beretta 92A1 and 96A1
By 6.8Shooter in forum PistolsReplies: 14Last Post: January 17th, 2011, 10:48 AM -
Trigger issue?
By Johannes_Paulsen in forum GeneralReplies: 5Last Post: May 17th, 2007, 09:39 PM
Bookmarks