S&W model 28

[*Klutch*]

What can you guys tell me about the model 28 highway patrolman? I'm familiar with them but never seen one and don't know a whole lot about them, just looking for some help/info.

How do they compare to the model 19?

I am familiar with the size difference...

[RichG]

They are built on N frame. Will hold up better to .357 ammo better. Use to have one. Was a nice revolver.

[pennlineman]

I have a pre model 27 which is just a more refined version of the 28. These N frames are very strong guns and I agree that that will hold up better to lot of magnum loads. With the large frame comes some additional weight. A plus for shooting as it tames recoil a good bit when compared to the same load out of my 19's. Shooting mild .38 spl loads is a lot like plinking with a .22. This additional weight may be viewed as a negative for carrying purposes when compared to the K frame model 19.

The grip frame is larger and may be an issue for folks with smaller hands. I can get by with the smaller magna grips on N frames but the larger target grips are a bit much. The gun that fits your hand best may well be the best choice for you. My example has been accurate with the different handloads I've tried in it so far.

The only real issues you need to determine is what you are going to use it for. A 19 would be a lighter carry gun and great if you plan on shooting .38's a good bit for practice. Keep in mind that the model 19 had issues with the barrel cracking around the forcing cone when shooting magnum bullets weighing a 125 grains or less. This is the reason why the L frame 586/686 came about. If you are planning on shooting a steady diet of magnums, especially the lighter weight bullets I'd go with the 28 as it never had this issue.

[*Klutch*]

Well, I intend to use it for a range gun, I'm sure at some point I'll carry it but not very often. I reload my own ammo so that's not an issue, but I'll load 38 and 357 for it. My hands are medium to large so I plan on trying several grips with it, the one I'm looking at has 2 sets of grips: a set of magna grips and a set of Ahrends boot grips so we'll see what works better.

[Ultramagnus]

i took mine out a couple weeks ago, it is really easy to shoot full power magnums. Its a little big for my smallish hands, but its such a nice platform.you can shoot magnums out of it all day without it beating you up. the forcing cone is massive compared with a 19.

two videos my friend took if your interested:

http://www.youtube.com/watch?v=u0Y0ekQpbxY

and some muzzle fllash at night
http://www.youtube.com/watch?v=O9EWa...eature=related

[knight0334]

The 28 is a large frame gun, where as the 19 is a medium frame gun. The 28 is more like a Sherman tank, where the 19 is like a passenger car. K-frame guns cannot withstand continuous heavy loads, but the N-frame can. The .357mag was designed for N-framed guns with the factory spec of a 158gr slug @ 1450fps. K-frames cannot handle those original spec loads for very long. Even today's pussified .357mag loads beat the hell out of a K-frame.

My dad's 28 is a very accurate and tight gun. I used to OC it from 18yo til I was 19 or 20 when I bought my Python off my uncle. I have a pic of me OC'n dad's gun in his left hand belt holster carried on me like an over the shoulder type arrangement from when I was a teen somewhere.. I'll post it if I can find it.

[Brick]

Model 19 is a K-frame revolver a bit smaller in size (S&W describes the K Frame as a medium size it is the same size frame used for Model 10, or K38 Masterpiece, just to name a couple. The N-frame of the Highway Patrolman (Model 28) is S&W large frame as used for the original .357 Magnum (which became the Model 27). The same frame is also used for Model 25 (.45 Colt) and Model 29 (.44 Magnum).

The Model 28 Highway Patrolman was offered as a "low price" option to the Model 27. They are essentially the same in quality and fit but the M28 didn't have as much "polish". It was a workmanlike revolver aimed specifically at the Police market.

They are a fine revolver, but as with any used gun purchase check it over carefully. Don't be afraid to bring your feeler gauges with you and check gap and end-shake and everything else that is possible before you complete the purchase.

For my own part. I'd like to have one in 4" for IDPA and one in 6" for PPC. (Add that to the dream on category!)