Results 1 to 3 of 3
Thread: Bersa .380
-
December 3rd, 2011, 10:56 AM #1
Bersa .380
So, I pulled an idiot move and attempted to disassemble a Bersa .380 without actually knowing what I was doing (thought I did). I removed the take down lever from the frame not realizing that this was NOT a part of the process. Now, I cannot seem to get the thing back in. Does ANYONE have any insight on how to fix this. I'd rather not have to take it to a shop, but that's the only information I have found thus far. Thanks in advance guys.
Take care
-
December 3rd, 2011, 12:42 PM #2Active Member
- Join Date
- May 2007
- Location
-
Bangor,
Pennsylvania
(Northampton County) - Posts
- 234
- Rep Power
- 106147
Re: Bersa .380
www.bersachat.com
Go forums
Bersa forum
You will get help here. Ask the question.
Lot of knowledgeable people, some who went through this procedure.
You may need to register-do it. As I remember, process was fast.
I do not have specific step by step knowledge on this.
Put everything aside until you get help there. Try not to mess it up further.
Best of luck
-
December 3rd, 2011, 05:27 PM #3
Re: Bersa .380
Thanks John,
Problem is fixed. My Cousin came over and sorted it out for me. I appreciate the fast response and also the information on the Bersa forum.
Similar Threads
-
My old Bersa's
By SteveHH in forum Gun PicturesReplies: 2Last Post: March 1st, 2011, 12:55 AM -
.22 Bersa (?)
By LorDiego01 in forum GeneralReplies: 6Last Post: October 15th, 2009, 03:17 PM -
(Purchased the Bersa) Bersa Thunder 45 ACP Compact-Bethlehem
By pistolenvoy in forum GeneralReplies: 0Last Post: July 12th, 2009, 03:59 PM -
Bersa 380
By one gun son in forum GeneralReplies: 0Last Post: April 9th, 2009, 12:11 PM -
Looking to try a Bersa 9mm UC
By Golferman in forum GeneralReplies: 3Last Post: August 15th, 2008, 04:34 PM
Bookmarks