Results 1 to 2 of 2
-
November 5th, 2011, 11:35 PM #1Super Member
- Join Date
- May 2008
- Location
-
Springfield,
Pennsylvania
(Delaware County) - Posts
- 533
- Rep Power
- 114899
Biggest caliber you load on what turret press?
Recently I added .338 Lapua to the cartridges I reload. I was worried what press I would have to add but my Lyman turret press handles it fine. I like the Lee Classic turret press (but don't own one since I have 2 Lymans), especially the fact that you can buy additional 4 hole turrets for less than $10, thus leaving every die you have setup already.
But the question I can't figure out is:
What is the biggest caliber you can load on the different turrets?
The Lyman T-Mag press works great and I have loaded .308, 30-06, 300 Win Mag and now .338 Lapua.
What about you other turret press owners?
Anybody use a Lee Classic turret with .338 LM?
Thanks,
Smitty56
-
November 6th, 2011, 02:06 PM #2
Re: Biggest caliber you load on what turret press?
I have the LEE classic turret press. The longest stuff I load are 300 Win Mag with Berger bullets. It works fine but I have to remove the auto-index rod since the turret will start to turn before the round is clear. I cant use the auto-index with my 7mm mag either.
Similar Threads
-
Upgrading to a turret press
By okinawanfighter in forum Ammunition & ReloadingReplies: 66Last Post: December 1st, 2011, 12:37 PM -
Lee Turret Press and 308's
By Chaind in forum Ammunition & ReloadingReplies: 5Last Post: December 1st, 2010, 02:03 AM -
Lee turret press 9mm
By guitar72186 in forum GeneralReplies: 2Last Post: September 17th, 2009, 10:53 PM -
Lee Turret Press
By Yoder in forum GeneralReplies: 25Last Post: May 22nd, 2009, 09:19 AM -
Lee turret press
By A/C guy in forum GeneralReplies: 8Last Post: January 4th, 2009, 09:38 PM
Bookmarks