Any good engravers around Beaver county?

**JesterPgh** · August 9th, 2011, 12:11 AM

Thinking about getting something done, but I don't want to end up with shoddy work. Any recommendations?

**o1dakota440** · August 9th, 2011, 12:17 AM

what are you planning to have done? (stock-barrel-reciever-ect...) and what is the engraving going to be?

**JesterPgh** · August 9th, 2011, 09:01 AM

Decorative engraving on the blank side of an AR lower.

**o1dakota440** · August 9th, 2011, 04:16 PM

well i have a cnc machine that could do the job. but since i'm not a ffl holder yet and you want a reciever done, i cannot legally do it. sorry.

**progman** · August 18th, 2011, 05:33 AM

You need a FFL to work on a gun?

If the machining is not completed could you do it (80% or just a forging)? ..never mind. I can see the pointlessness of that.

When you get a FFL let me know I may be interested as well.

**Nate7667** · August 18th, 2011, 08:00 AM

Just send it to Orion Arms, you will not be disappointed.
http://www.orion-arms.com/gun-engraving/welcome.html

**LisaA** · August 18th, 2011, 08:11 AM

Originally Posted by Nate7667

Just send it to Orion Arms, you will not be disappointed.
http://www.orion-arms.com/gun-engraving/welcome.html

WOW, Orion Arms does nice work!! Thanks for the link.

**o1dakota440** · August 21st, 2011, 11:35 PM

i would like to just throw this out there, if anyone here has experiance with a cnc maching/router/engraver. you are more than welcome to use mine, while i'm having a ton of downtime. i just ask that you replace any tooling that you might break. this offer is just for the hobby guys that want to do a project for themselves, not for the guys who want to make a living or ton of cash with my tools. if you are interested and want some more info please feel free to contact me. my machine works best on softer materials but i have milled some stainless with it. the working area is about 14"x16"x roughly 5". keep in mid that this is a diy hobby sized machine. so let me know.