Results 1 to 3 of 3
Thread: Custom parts for Beretta M9/92
-
August 2nd, 2011, 11:12 AM #1Active Member
- Join Date
- Jan 2011
- Location
-
Hermitage,
Pennsylvania
(Mercer County) - Posts
- 114
- Rep Power
- 1301
Custom parts for Beretta M9/92
I just picked up a Beretta M9 and I wanted to add some "performance" parts to it. I already ordered some hammer and recoil springs from Wolff and I was wondering if anyone has ever "customized" an M9. What parts did you use and where did you get them. Theres a ton of M9/92s out there and they are very popular but I'm having trouble finding parts.
-
August 2nd, 2011, 02:00 PM #2Senior Member
- Join Date
- Dec 2010
- Location
-
The Sticks
(Mercer County) - Posts
- 464
- Rep Power
- 2119
Re: Custom parts for Beretta M9/92
Might look at:
http://www.brignoliarmi.com/catalogo...c=15&lingua=uk
http://www.olhasso.com/PS/parts.htm
Even CDNN:
http://www.cdnninvestments.com/beretta92961.html
Could join the Beretta forum; http://www.berettaforum.net/vb/index.php and see what they can do for you.
FWIW, I shoot my M9 stock (aside from an action job I did), and when fed ammo I make that has the proper diameter for its and many other M92/92FS barrels (Use .357" jacketed/.358" lead), accuracy is very, very good without any do-dads. Lots of folks like to add a skeleton hammer, extended mag release, and do a very simple trigger job adding a "D" spring. Some folks like to add a barrel bushing, or compensator, but be advised doing so will most likely void any factory warranty you may have.
Personally, I feel the bushing is a waste of $$$, and until you go with a custom match barrel with a slower twist and .355" groove diameter, work on the frame with rail inserts, and do other touches, using well assembled ammo that compliments its generally generous dimensions is what I find maximizes the pistols great potential for accuracy.
Lastly, Here is a great link to what can be done to the military M9 to gain max performance that I bet you will find interesting.
http://www.gun-tests.com/performance...ootbetter.html
Good luck!
-
August 12th, 2011, 11:05 AM #3Grand Member
- Join Date
- May 2010
- Location
-
Midwest City,
Oklahoma
- Posts
- 2,224
- Rep Power
- 1024
Re: Custom parts for Beretta M9/92
Lets see it stage by stage as you get it customized the way you want it. I've seen some pretty fancy Beretta 92s/96s my Brigadier Elite has some custom features to it lighter trigger, Inox barrel with thinner grips and night sites. Lets see what you can do with the 92sf as a base.
Similar Threads
-
Parts for a BERETTA COUGAR
By ironhorse in forum PistolsReplies: 5Last Post: February 19th, 2010, 04:52 PM -
Beretta Custom Carry II Stainless
By usabug in forum GeneralReplies: 0Last Post: March 29th, 2009, 11:46 AM -
1981 Honda CB650 Custom - lots of new parts - $900
By Azzy in forum GeneralReplies: 0Last Post: April 29th, 2008, 10:31 PM -
WTS: Beretta 92 Parts
By Big D in forum GeneralReplies: 6Last Post: December 25th, 2007, 12:52 AM
Bookmarks