Results 1 to 10 of 125
Thread: Charter Arms Research
Hybrid View
-
January 3rd, 2008, 04:52 PM #1
Charter Arms Research
I've begun doing research on 1st GENERATION Charter Arms revolvers. I'm looking for pieces with either BRIDGEPORT or STRATFORD CONN Barrel addresses.
What I need is which address, what is the serial number (XX is Ok for now), model name, finish and any information about when made or purchased? I've just started and so far I have about 60 serial numbers and addresses. When I get enough info to develop some idea of dates, I'll post and update. Thanks in advance.
JimJim Hauff H&R Collector In memory of my friends Bill Goforth and Jim Ritchie.
-
June 2nd, 2009, 08:07 PM #2Junior Member
- Join Date
- Jun 2009
- Location
-
Lakeland,
Florida
- Posts
- 3
- Rep Power
- 0
Re: Charter Arms Research
I have a stainless Pathfinder .22 LR w/ 3" barrel, labeled Bridgeport, Conn., serial number 811xx.
Any idea of date range of manufacture?
Thanks
-
June 2nd, 2009, 11:02 PM #3Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
Re: Charter Arms Research
Mine is a 38SPL, Stainless, 2". I prchased it in 81 or 82, and had Charter put the bobbed hammer and no-snag sight on it. I later silver-soldered the front sight.
S/N 778XXX "STRATFORD"
OP on thread " "Inexpensive does not mean "cheap" " describes it.
Nice goal - keep me posted on your results.
FlashLast edited by Flash; June 2nd, 2009 at 11:18 PM. Reason: add "STRATFORD"
-
June 3rd, 2009, 05:43 PM #4Junior Member
- Join Date
- Jun 2009
- Location
-
Lakeland,
Florida
- Posts
- 3
- Rep Power
- 0
Re: Charter Arms Research
Got a reply from the current Charter Arms saying my Pathfinder is circa 1967. Hopefully a nice little find!
-
June 5th, 2009, 08:27 PM #5
Re: Charter Arms Research
lwoods - thanks for the info. Your piece is Nickel plated - Charter Arms didn't produce anything in stainless steel until April/May of 1981. It's good for a research milestone to know that this one is 1967 era.
Flash,
Thanks for your info also. The bobbed hammer was called the "Pocket Hammer" in their catalogues. Is your piece an "Undercover" model?Jim Hauff H&R Collector In memory of my friends Bill Goforth and Jim Ritchie.
-
June 5th, 2009, 08:40 PM #6Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
Re: Charter Arms Research
Yes, it was called the "Undercover" when I purchased it. It did originally come with the spur hammer, but I sent it back for the "pocket hammer". You are right on that name, I just kinda forgot in the two or three years since I bought it - - - LOL.
I had a blued S&W 36 since late 60's, and one of my friends on the Wash, D.C. (city) PD department had a blued Charter with spur hammer and a nickel-plated Chief's Special, and it kinda set me afire for having anothe J-frame - but shiny, and when the Charter came out in stainless and at a price vastly less than the prized S&W, I opened up the wallet.
Flash
-
July 13th, 2010, 05:53 AM #7Junior Member
- Join Date
- Jul 2010
- Location
-
Philladelphia,
Pennsylvania
(Philadelphia County) - Posts
- 1
- Rep Power
- 0
Re: Charter Arms Research
Not sure if this is a Undercover or a Undercoverette. As you can see in the scans the manual says "Undercover" and shows an exact image of the gun I have. The back page has a picture of a "Undercoverette" and it looks exactly the same. This was my mothers gun and I'm guessing she bought it in the mid 70's. I found it in it's original box (with wax paper) wrapped in newspaper. The manual was in the box. There was also a box of bullets with 10 missing. I'm guessing she and my father both shot 5 rounds when they bought it at a local gunshop (I know that shop had a range). The box is a generic Charter Arms box with a sticker on one flap with "Charter 2 38 SPL" and the serial number printed on it. Price sticker says "List Price 173.00", "Our Price 164.95". I see some on the web going for $300 in good condition, this one looks like new. Serial Number is 644XXX. It weighs 16 Oz's empty.
It's a nice old gun, looks like it's well made. I never heard of a 5 shoot revolver. Trigger guard and handle frame look like there aluminum. Hammer looks like hardened steel. Wooden grips. The barrel is about 1 1/4 inches long so I'm guessing it's the 2 inch barrel model I have been reading about on the web. The 4 scans are the entire manual.
So is it a Undercover or a Undercoverette ? And when was it made ?
Well OK, so I should have read the manual. The Undercoverette comes in .32 and mine is a .38, I have a undercover. Thanks for pointing that out Flash. (It says so in the manual, and I read it many times, it's in the third thimbnail, mental block I guess)Last edited by Matazel; July 16th, 2010 at 08:47 AM. Reason: Update
-
July 13th, 2010, 02:08 PM #8Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
-
July 16th, 2010, 07:10 AM #9
Re: Charter Arms Research
I have a blued undercover .38 with a Stratford address, Ser.# 6993xx. I bought it used along with a shotgun a few years ago with no paperwork included.
-
August 7th, 2010, 01:01 PM #10
Re: Charter Arms Research
Sorry for the delay in responding - I had my left leg busted up pretty badly earlier this year and haven't been able to sit at the computer for very long - up untill just recently - I'm determined to answer or at least add some data to all the previous postings, but it may take a couple days to do so. Thanks, Jim
Jim HauffLast edited by 32 Magnum; August 7th, 2010 at 02:33 PM.
Jim Hauff H&R Collector In memory of my friends Bill Goforth and Jim Ritchie.
Similar Threads
-
Charter Arms - old style
By 32 Magnum in forum PistolsReplies: 30Last Post: June 6th, 2020, 09:56 PM -
Charter Arms - the OLDER ones.
By 32 Magnum in forum GeneralReplies: 6Last Post: October 24th, 2007, 06:56 AM -
Charter Arms Undercover .38 spec
By Plain Old Bill in forum GeneralReplies: 1Last Post: October 20th, 2007, 11:39 AM -
WTS: Charter Arms Bulldog .44 Spcl (SS)
By mosesbrown in forum GeneralReplies: 4Last Post: July 20th, 2007, 10:14 AM -
Magnum Research BFR in 500 S&W - anyone else???
By Bigbore in forum GeneralReplies: 4Last Post: March 13th, 2007, 07:00 AM
Bookmarks