Results 1 to 9 of 9
Thread: Any Ideas?
-
June 4th, 2011, 01:50 PM #1
Any Ideas?
Found this in my grandfathers basement workshop. He passed away a year or two ago and left lots behind down there.
Not sure what it is, or really what to do with it.
It has a live 38 special casing I'm assuming for primer purposes, so I take it that this is a live cartridge.
Phone pictures, so my apologies for the low quality.
-
June 4th, 2011, 02:01 PM #2
Re: Any Ideas?
Says 1 pounder on it which is a 37mm gun. Could be AA, antitank or an old British Pom Pom gun ammo.
I couldn't even begin to tell you what to do with it."Disperse you Rebels! Damn you! Throw down your Arms and Disperse!" British Major Pitcairn at Lexington April 19, 1775
"Sometimes reasonable men must do unreasonable things" Marvin Heemeyer
-
June 4th, 2011, 02:21 PM #3Grand Member
- Join Date
- Jun 2007
- Location
-
PA,
Pennsylvania
(Delaware County) - Posts
- 3,604
- Rep Power
- 1246703
Re: Any Ideas?
Don't make any sort of impact on the silver looking thingie
-
June 4th, 2011, 02:36 PM #4
-
June 4th, 2011, 02:45 PM #5
-
June 4th, 2011, 02:56 PM #6Senior Member
- Join Date
- Mar 2011
- Location
-
next to a field,
Minnesota
(Butler County) - Posts
- 472
- Rep Power
- 2915
Re: Any Ideas?
keep looking around in the basement, maybe you'll find the gun :P
-
June 4th, 2011, 03:00 PM #7
Re: Any Ideas?
Found this link with pictures, saw a couple of pictures with a large hole in the base, hopefully someone just stuck a .38 with the primer to make it look real.
There are casing measurements, take a look at the 2nd picture for 37mm, labeled 1.457 inch sub cal.
http://www.big-ordnance.com/EarlyUSC.../USCasings.htm
Also found this page:
http://ator1149.home.xs4all.nl/wfm/w...on2.html#canon
If the case is 137mm....it is US Navy most likely."Disperse you Rebels! Damn you! Throw down your Arms and Disperse!" British Major Pitcairn at Lexington April 19, 1775
"Sometimes reasonable men must do unreasonable things" Marvin Heemeyer
-
June 8th, 2011, 09:09 AM #8
Re: Any Ideas?
Spot on, looks just like it. Need some more info on WMFG Co. !
I really hope so too, but the way it's almost sealed in there makes me think otherwise. Definitely hear powder inside the casing as well. Well, I suppose I'll leave it sit down there. I certainly don't want to get tangled into some kind of mess.
-
June 8th, 2011, 09:39 AM #9
Re: Any Ideas?
WMFG Co was an American manufacturer. WMFG might be Winchester ManuFacturinG Company.
It looks to be 37mm(3.7cm) Hotchkiss shell.
If the projectile has an explosive charge - it could be a Destructive Device. However, that shell looks to have a solid steel point which is the Armor Piercing version. To be sure, look about an inch down from the tip of the projectile for a very faint line. If there isn't a line, its a solid AP round. If there is a line, it possibly has a charge - which could possible be the DD mentioned above.Last edited by knight0334; June 8th, 2011 at 09:48 AM.
RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
Similar Threads
-
Got ideas for an AR?
By YllwFvr in forum RiflesReplies: 28Last Post: November 9th, 2010, 10:44 PM -
Bullet Ideas
By ksig1869 in forum Ammunition & ReloadingReplies: 11Last Post: October 7th, 2010, 01:23 PM -
We want your ideas!
By danp in forum Support & SuggestionsReplies: 114Last Post: April 1st, 2009, 08:33 PM -
AR Ideas
By FireGS in forum GeneralReplies: 12Last Post: December 26th, 2008, 12:16 AM
Bookmarks