Lee powder disks

[wheelman53]

Also, Lee disks tend to measure a little less than Lee states on the charts. It is a starting place. Depending on the powder, you may need to use a larger cavity.

You might try coating the top surface of the disk with graphite - just a thin coat.

[*Klutch*]

Well a very odd thing, after posting this thread, I went back and just loaded. I measured every 5th round and it was 3.7gr on everyone for 100 rounds, I then loaded 300 more and checked every 10th for the first 100 and perfect. I have had this press for several years and not any issue like this before.

[DeadHead]

Did you think about checking out your scales yet??

[*Klutch*]

scales are good