Results 1 to 4 of 4
-
May 24th, 2011, 12:32 PM #1
Yugoslavian M57 Tokarev magazine problems.
If anyone onwns a m57 Yugo, has anyone esperienced a problem where the magaizne gets stuck in the gun on the last shot. As if there is a problem with the follower?
-
May 24th, 2011, 12:58 PM #2Junior Member
- Join Date
- May 2010
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 5
- Rep Power
- 0
Re: Yugoslavian M57 Tokarev magazine problems.
I had some problems with my magazines originally, I did not get all of the cosmaline out of the magazine release. I would try taking the magazine release out and cleaning it really well, the assembly is held together by a split end pin, I was able to remove mine with a small flat head screw driver. Another thing I noticed is I put one of the springs in the magazine backwards and that caused some issues with feeding. It would also be a good idea to clean the magazine really well as mine was quite full of cosmaline too. Hope this helps!
-
May 24th, 2011, 01:04 PM #3
Re: Yugoslavian M57 Tokarev magazine problems.
I blasted and soaked the mag release on one with a good bit of low VOC brake cleaner, did the trick just perfect with that little straw. Wear gloves and goggles.
(Then I realized how much easier it was to clean the whole thing that way!)
-
May 24th, 2011, 05:13 PM #4
Re: Yugoslavian M57 Tokarev magazine problems.
Give it a very good cleaning to be sure you've removed all of the cosmoline. I second the brake cleaner suggestion.
Similar Threads
-
EAA Witness magazine problems
By spblademaker in forum GeneralReplies: 0Last Post: September 14th, 2009, 05:15 PM -
Swiss K31($200) and Yugoslavian M48($190)
By Whiterook in forum GeneralReplies: 10Last Post: August 1st, 2009, 05:28 PM -
WTS/WTT: Yugoslavian SKS
By Jhiaxus in forum GeneralReplies: 12Last Post: April 12th, 2007, 02:04 PM
Bookmarks