Results 1 to 4 of 4
Thread: Springfield TRP guide rod
-
April 25th, 2011, 04:39 PM #1
Springfield TRP guide rod
Was out shooting the TRP today and noticed when I was done, about 150 rounds, that the full length guide rod started coming loose. Is this normal to happen sometimes? I've been wanting to order a GI "guide rod" just for the ease of takedown not requiring any tools. So it's not going to be an issue for to long. I just wanted to see if anyone on here had this happen before. Thanks.
-
April 25th, 2011, 06:01 PM #2Active Member
- Join Date
- May 2006
- Location
-
Pennsylvania
(Lehigh County) - Posts
- 228
- Rep Power
- 457488
Re: Springfield TRP guide rod
I had the same problem with my Springfield Loaded so I got an EGW GI guide rod and plug. It is much easier to field strip.
-
April 25th, 2011, 09:02 PM #3
Re: Springfield TRP guide rod
If it is a two piece guiderod, yes. They will work lose after awhile. I put a very small drop of red loctite on mine.
Friends don't let friends buy Taurus's
-
April 26th, 2011, 01:21 PM #4Member
- Join Date
- Sep 2008
- Location
-
Moon Township (Pittsburgh),
Pennsylvania
(Allegheny County) - Posts
- 65
- Rep Power
- 286
Re: Springfield TRP guide rod
FLGR's do nothing. toss it and get a standard plug/short rod setup.
Similar Threads
-
New gun guide
By DuckGuy in forum GeneralReplies: 0Last Post: November 6th, 2009, 06:53 PM -
Guide Pin Lasers?
By wa3ra in forum GeneralReplies: 2Last Post: January 14th, 2009, 11:44 PM -
Guide me
By Lucas in forum GeneralReplies: 16Last Post: November 11th, 2008, 09:01 AM -
sportsman's guide
By budman46 in forum GeneralReplies: 7Last Post: September 11th, 2008, 03:51 PM -
guide rod
By xddan in forum GeneralReplies: 3Last Post: June 30th, 2008, 07:29 PM
Bookmarks