Norinco NHM 91 RPK?

**TB215** · March 5th, 2011, 02:55 PM

I hate the thumbhole stock and wood on the upper and lower handguard.

Will I be breaking any laws if I was to replace the ugly thumbhole stock, lower handguard, and upper handguard with authentic Norinco or Polytech wood?

And I never thought how difficult it would be to get these parts too.

**forceinPA** · March 5th, 2011, 03:23 PM

It can be done. You would need to add 4 USA parts. get a tapco trigger set, US made mag and floorplate and your just about done

**JustinM** · March 5th, 2011, 03:53 PM

IronwoodDesigns.com

See NHM91 in pic. Great furniture. This set was #1 off the assembly line

Uploaded with ImageShack.us

**TB215** · March 7th, 2011, 12:25 PM

Originally Posted by forceinPA

It can be done. You would need to add 4 USA parts. get a tapco trigger set, US made mag and floorplate and your just about done

I want to leave the trigger set because Norinco triggers are the best.

If I get a US mag that counts for 3 and instead of putting on the Chinese pistol grip, I put on a Tapco pistol grip that counts for one, will that suffice?

Some tell me I need to replace 5 parts and you say 4.

**TB215** · March 7th, 2011, 12:26 PM

Please help me out with the clarification of how many parts I need to replace.

I really don't need a felony charge just because I want chinese wood on my gun.

Thanks and it's greatly appreciated.

**King 5.45** · March 7th, 2011, 12:58 PM

I second the Ironwood suggestion. It's just easier.

But if you're insistent, use this web gizmo to check for compliance in your build:

http://gunwiki.net/Gunwiki/BuildAkVerifyCompliance

You'll learn a thing or two this way and then be able to help someone else down the road.

**BIGSHOVEL** · March 7th, 2011, 01:11 PM

I just built my MAK 90 over the weekend.

I used the VLTOR modstock adapter.

Magpul MOE stock

TAPCO SAW grip

Ultimac Scout top rail/gastube

And bought TAPCO mags and followers for steel mags.

Compliance was met with above

Leave the trigger alone.

**marinville** · March 7th, 2011, 05:16 PM

Originally Posted by King 5.45

I second the Ironwood suggestion. It's just easier.

But if you're insistent, use this web gizmo to check for compliance in your build:

http://gunwiki.net/Gunwiki/BuildAkVerifyCompliance

You'll learn a thing or two this way and then be able to help someone else down the road.

Good information in that link.