Results 1 to 10 of 20
Hybrid View
-
February 8th, 2011, 06:24 PM #1
Any feedback on the ATI - Xtreme Machining AK-47
Hey I'm not real familiar with the different AK models or manufacturers, but I'd like to get one for myself sometime. I'm not looking for an ultra tactical type just yet, and kind of like the ATI by Extreme Machining, and if I understand right they are made here in PA (bonus points for local manufacturing). But I have no idea on the quality and reliability of them. Are they any good? is there any specific defects or flaws I should watch out for if I buy one? Any advice would be appreciated, so thanks in advance.
-
February 8th, 2011, 09:06 PM #2Grand Member
- Join Date
- Sep 2007
- Location
-
SomewhereWestPA,
Pennsylvania
(Allegheny County) - Posts
- 4,520
- Rep Power
- 21474857
Re: Any feedback on the ATI - Xtreme Machining AK-47
They were just announced a week ago, maybe 2. It'll be a few more days before they come out, I'm sure... 99-billion other guns they could've built - they come out with a Bulgy mix-master.
Edit: Check the classifieds...Last edited by nfafan; February 8th, 2011 at 09:09 PM.
-
February 8th, 2011, 09:46 PM #3
Re: Any feedback on the ATI - Xtreme Machining AK-47
i saw a couple of ATI AK's at a shop called surplus city guns and they do look nice and much better than some of the century builds i've seen. the ones i saw had milled receivers and were price around 500 bucks which is a pretty good price for a milled receiver AK. i've never shot one so i have no idea how reliable or unreliable they may be.
-
February 9th, 2011, 12:25 AM #4
-
February 9th, 2011, 08:41 AM #5Grand Member
- Join Date
- Sep 2007
- Location
-
SomewhereWestPA,
Pennsylvania
(Allegheny County) - Posts
- 4,520
- Rep Power
- 21474857
Re: Any feedback on the ATI - Xtreme Machining AK-47
The ATI - as in GSG5 - folks - are introducing a STAMPED AK; the "SAT47". A Bulgy kit with ER Shaw barrel and PA-made recvr.
http://www.youtube.com/watch?v=XKMKU...eature=related
-
February 9th, 2011, 08:48 AM #6Grand Member
- Join Date
- Nov 2006
- Location
-
Welfaristan.,
Pennsylvania
- Posts
- 1,569
- Rep Power
- 16548866
Re: Any feedback on the ATI - Xtreme Machining AK-47
NICE
I've been to both of their places where the guns are made.
A Magical , Magical little world.
-
February 9th, 2011, 01:04 PM #7Junior Member
- Join Date
- Oct 2009
- Location
-
beaver county,
Pennsylvania
(Beaver County) - Posts
- 29
- Rep Power
- 0
Re: Any feedback on the ATI - Xtreme Machining AK-47
The price I see is $899 for milled
http://dealer.americantactical.us/products?product=1298
The video is a stamped AKLast edited by 919; February 9th, 2011 at 01:14 PM.
-
February 9th, 2011, 02:38 PM #8
Re: Any feedback on the ATI - Xtreme Machining AK-47
I don't know if the one I checked out was milled or stamped (I didn't know the difference) I was at a little gun shop in back country part of New York about a month ago, and they had one of these ATI AK's there for only $500 (new) It felt nice & solid, not to mention it looked pretty cool, why the huge price difference?
Also is there a big advantage to milled vs stamped receivers?
-
February 3rd, 2012, 12:49 PM #9Junior Member
- Join Date
- May 2007
- Location
-
Mansfield,
Ohio
- Posts
- 1
- Rep Power
- 0
Re: Any feedback on the ATI - Xtreme Machining AK-47
I just purchased one yesterday at Fin Feather in Ashland Ohio, I thought having one with a new receiver might be the way to go. Nice solid gun. The dealer didnt have any answers about the ATI company, I asked if there was any warranty, he didnt know.
My pricing was $525.00. I later found out MSRP is $499.00. I made several attempts to call ATI and just get a answering machine.
Gun & Ammo magazine shows upgrade kits from ATI for the AK, I dont see it on the website.
I give it a thumbs up....Now on to search for the ammo......
-
February 3rd, 2012, 01:10 PM #10
Re: Any feedback on the ATI - Xtreme Machining AK-47
Do you think the stamped model for $499 be free of mag wobble and canted sights like some of the Century models have? What about a side mounted scope rail?
Edit: It does come with a side mounted scope rail.Last edited by LifeInPa; February 3rd, 2012 at 01:12 PM.
Sanity, yours if you can keep it.....
Similar Threads
-
Ruger LCP, strange machining mark inside of barrel chamber
By afultz075 in forum PistolsReplies: 10Last Post: October 24th, 2010, 10:39 AM -
Anyone use a Burris 1-4x24 Xtreme?
By PaGunner in forum OpticsReplies: 6Last Post: October 6th, 2010, 02:29 PM -
Xtreme machining
By Bigrepp61 in forum GeneralReplies: 0Last Post: May 14th, 2009, 10:31 PM -
Robar Alloy Xtreme
By Rule10b5 in forum GeneralReplies: 3Last Post: January 25th, 2009, 02:58 PM -
Remington Xtreme Conditions Shotgun Mariner
By fultonCoShooter in forum GeneralReplies: 1Last Post: January 6th, 2008, 10:36 PM
Bookmarks