Results 1 to 8 of 8
Thread: Plugging holes????
-
December 4th, 2010, 10:47 PM #1Active Member
- Join Date
- Mar 2010
- Location
-
Brookhaven,
Pennsylvania
(Delaware County) - Posts
- 183
- Rep Power
- 1053326
Plugging holes????
I bought a pristine antique Winchester 1892 rifle.
Sad thing was the original owner mounted a tip off scope mount and in the process drilled and tapped two holes in the sideplate.
I removed the scope mount and am left with the two threaded holes.
What can I use to fill in those holes.
Allenscrews look bad and standard screws have thick heads that stand out
badly.
Is there something I can put in those threaded holes that will leave them looking decent?
Gerry
-
December 4th, 2010, 10:51 PM #2
Re: Plugging holes????
might be able to find some tiny set screws at the hardware store...sometimes with smooth backs.
-
December 5th, 2010, 12:00 AM #3
Re: Plugging holes????
Look on youtube for midway's videos. There is one on how to plug holes.
-Zach
-
December 5th, 2010, 11:02 AM #4
Re: Plugging holes????
What size plugs do you need I can send you a set if you tell me the thread size.
-
December 5th, 2010, 11:38 AM #5
Re: Plugging holes????
I always love how easy they make everything seem in these Midway USA videos. :P
-Zach
-
December 5th, 2010, 12:00 PM #6Super Member
- Join Date
- Sep 2009
- Location
-
gardeners,
Pennsylvania
(Adams County) - Posts
- 603
- Rep Power
- 113428
Re: Plugging holes????
it is just that easy some times. i have done it lots of times. i would not work down the area arounf the holes as much as he did.
-
December 5th, 2010, 06:16 PM #7Senior Member
- Join Date
- Mar 2008
- Location
-
Seven Fields,
Pennsylvania
(Butler County) - Posts
- 336
- Rep Power
- 280
Re: Plugging holes????
Good info, I have the same issue with a Winchester 1894 I picked up recently. I suppose since it isn't original anymore I can go ahead and have it refinished but we'll see.
Thanks to all and to the OP
-
December 6th, 2010, 10:47 PM #8
Re: Plugging holes????
The plugs are on the way I hope they work for you. EDR
Similar Threads
-
Can someone put some holes in this for me?
By Atrumnex in forum Training, Tactics & CompetitionReplies: 9Last Post: August 26th, 2010, 12:53 AM -
Tight Flash holes?
By VeryPrivate in forum GeneralReplies: 1Last Post: December 15th, 2008, 01:00 PM -
Primer Pocket Holes
By SteveWag in forum GeneralReplies: 11Last Post: November 19th, 2008, 09:28 PM -
Black Holes
By PisnNapalm in forum GeneralReplies: 21Last Post: July 21st, 2008, 12:35 PM -
9mm vs. .40 S&W target holes
By bvaguy30 in forum GeneralReplies: 2Last Post: June 9th, 2008, 06:33 PM
Bookmarks