Results 1 to 9 of 9
Thread: Sass in need of optics
Hybrid View
-
October 5th, 2010, 04:07 AM #1Member
- Join Date
- Jul 2010
- Location
-
Allentown Pa,
Pennsylvania
(Lehigh County) - Posts
- 30
- Rep Power
- 0
Sass in need of optics
I have pretty much a pieced together sass rifle and I am now looking for a variable scope for it. Looking for a max of 6x on the low side and around or higher than 16x on the top side. Going to be used for target shooting into 300yds maybe more depending on the range but most 100 to 300 and Id really like to be able to see where I am hitting with out a spotting scope or walk. Price range 1000 can go up in price a little or down.
-
October 5th, 2010, 06:15 PM #2
Re: Sass in need of optics
You can pick up a Leupold mk 4 6.5-20x50 for about that, same with a trijicon 5-20x50. There are a few other's out there as well. Can you give a little more of a description of what your looking for with the scope? MOA or MIL adjustments, MOA or MIL reticle(it's recommened to stick with the same type of measurement for the optic and the turrets). Have you checked out snipershide for ideas as well? Shed a little more light on exactly what you are looking for and hopefully we can get you pointed in the right direction. Also, post some pictures of your creation if you can, I'd like to see it and I'm sure others here would as well.
-
October 6th, 2010, 04:41 AM #3Member
- Join Date
- Jul 2010
- Location
-
Allentown Pa,
Pennsylvania
(Lehigh County) - Posts
- 30
- Rep Power
- 0
Re: Sass in need of optics
By redss82
Nothing really fancy started out as a used dpms oracle now has a dpms sass barrel, gas block, rifle length quad rail, magpul prs, timney single stage 4lbs trigger, forget what company's muzzle brake I have. The scope on it now is most likely a temp its a old burris usa made 6x-18x fullfield
I am open to mil/mil or moa/moa never used a mildot or mil adjustments. But I do have a good grasp of numbers so it should not be to hard to wrap my mind around it. I have been looking at the trijicon, sightron, burris xtr, nikon just at a loss at what to do.
-
October 6th, 2010, 11:53 AM #4Member
- Join Date
- Mar 2008
- Location
-
Schnecksville,
Pennsylvania
(Lehigh County) - Posts
- 79
- Rep Power
- 136
Re: Sass in need of optics
http://www.natchezss.com/product.cfm...c=NZ&src=BE553
I picked up one of the 3-15x50 models and it has very nice glass. Took it shooting near dusk and it did great. This is my first piece of mid to higher-end glass, so I was very impressed.
I researched before buying and other forums say they are comperable to a Weaver Super Slam.
-
October 10th, 2010, 11:22 PM #5Member
- Join Date
- Jul 2010
- Location
-
Allentown Pa,
Pennsylvania
(Lehigh County) - Posts
- 30
- Rep Power
- 0
-
October 11th, 2010, 03:09 AM #6
Similar Threads
-
DPMS SASS/NightForce
By K31 in forum Gun PicturesReplies: 11Last Post: August 10th, 2010, 02:55 PM -
DPMS 308 SASS - questions
By lovetoshoot in forum GeneralReplies: 1Last Post: September 1st, 2009, 04:02 PM -
SASS Members in local movie
By punxsutawneypete in forum GeneralReplies: 0Last Post: July 23rd, 2009, 11:36 PM -
Would this be acceptable for SASS shooting?
By Hokkmike in forum GeneralReplies: 2Last Post: April 22nd, 2008, 11:00 PM
Bookmarks