Results 1 to 10 of 14
Thread: Ruger MK III ammo???
-
September 19th, 2010, 06:09 PM #1Super Member
- Join Date
- Aug 2010
- Location
-
mohnton,
Pennsylvania
(Berks County) - Posts
- 657
- Rep Power
- 4199
Ruger MK III ammo???
I just picked a Ruger MK III and I'm interested in what ammo other people are shooting. I'm gonna make an ammo run tomorrow.
-
September 19th, 2010, 06:13 PM #2Grand Member
- Join Date
- Jan 2007
- Location
-
OUT TO LUNCH
- Posts
- 4,570
- Rep Power
- 21474858
Re: Ruger MK III ammo???
I buy bricks of Federal Target, 40 grain lead.....the Federal number is 714. My MKIII likes STANDARD velocity rounds the best. I have also fired CCIs and Aguila from the CMP.
Jules
-
September 19th, 2010, 06:17 PM #3
Re: Ruger MK III ammo???
I think this gun will burn through any .22 LR you can find. I have a Mk II and I have not found a cartridge it will not cycle properly.
Right now I am working through a box of 550 count Winchester HP's but I must have used 20 different types of .22 since I bought it, mostly FMJ though.
-
September 19th, 2010, 06:23 PM #4
Re: Ruger MK III ammo???
Congratulations on your purchase, they are good shooters. As far as ammo, there is good news and good news. The good news is the Rugers I have function with everything. If it has a malfunction with a round that goes off, that is a rare event. The other good news is that any brand of standard velocity 22s from CCI Standard Velocity to pricier ammo from makers like RWS, Laupa, or Eley are scary accurate. I shot some terrific groups with Wolf and SKS, but again, it will shoot everything. I do stick to standard velocity ammo for mine as it is more accurate and generally a little easier on wear to the gun. Hope this helps.
-
September 19th, 2010, 06:35 PM #5
-
September 19th, 2010, 06:44 PM #6Grand Member
- Join Date
- Sep 2007
- Location
-
Effort,
Pennsylvania
(Monroe County) - Posts
- 2,262
- Rep Power
- 3681644
-
September 19th, 2010, 07:35 PM #7
Re: Ruger MK III ammo???
I use Federal as well. Stay away from the lead ammo. The copper covered works better and is cleaner.
Have fun......nobody's going to do it for you
-
September 19th, 2010, 07:47 PM #8
Re: Ruger MK III ammo???
Federal bulk high velocity. I avoid remington as I get a ton of fail to fires (even with the volquartsen firing pin).
I also removed the loaded chamber indicator which was causing a TON of jams after it started getting dirty. Since removed, I haven't had a single jam in thousands of rounds. Even when the gun was brand new and pristine clean, it still jammed up at least once every hundred rounds.
I can't recommend the volquartsen target sear enough by the way. It makes an already good trigger even better.
-Zach
-
September 19th, 2010, 08:18 PM #9
-
September 19th, 2010, 08:51 PM #10
Re: Ruger MK III ammo???
Congrats on your MK III. If your looking for super tight groups, The standard velosity is the way to go. I have found it is more consistant but the other ammo mentioned will work as well.
I find the CCI to cleaner than some others. I'm not a big fan of Reminton .22cal. ammo.
As far as lead goes, you can either clean lead from the barrel or copper plating. Not much difference IMHO. Hi Vel I use the copper plate stuff.
Enjoy your new pistol!I love the smell of gunpowder in the morning.[
R.I.P......Murphy.
Similar Threads
-
Which ammo for Ruger LCP?
By joecon in forum PistolsReplies: 10Last Post: June 11th, 2010, 02:40 PM -
Ruger LCP Ammo
By cruzans in forum GeneralReplies: 7Last Post: October 10th, 2009, 08:48 PM -
.204 Ruger Ammo
By Pukindog in forum GeneralReplies: 1Last Post: June 3rd, 2009, 01:18 PM
Bookmarks