Results 1 to 5 of 5
Thread: RCBS Trim Pro 3-way Cutter
-
September 11th, 2010, 01:35 PM #1
RCBS Trim Pro 3-way Cutter
Picked one of these up recently and wanted to let the reloader's out there that it is well worth it. I load .223 and has it reduced the amount of time I spend on case prep. Trims, chamfers and deburrs all in one step. Comes in .20, .22, 6mm, .25, 6.5mm, .270, 7mm, .30 and .338.
Last edited by Toxicodendron11; August 21st, 2014 at 09:40 PM.
-
September 12th, 2010, 01:52 AM #2Active Member
- Join Date
- May 2008
- Location
-
Whitehall,
Pennsylvania
(Lehigh County) - Posts
- 157
- Rep Power
- 75
Re: RCBS Trim Pro 3-way Cutter
Well great... now you are going to make me spend even more money. There is a good quick video on youtube showing someone using this sucker with a power drill on an rcbs trim pro station... all I have to say is... AWESOME. Trimming / chamfering / deburring is my least favorite thing about reloading because it really does make my hands hurt after a short time!
Now the question is... does anyone know if this will work with lyman's trimmer? I'm wondering if the trimmer heads are universal. If so, that would mean that I wouldn't have to buy a whole new trimmer (and would cause me to buy it even faster).
-
September 12th, 2010, 07:21 AM #3
Re: RCBS Trim Pro 3-way Cutter
Yep I have one also. Not me on youtube but I do use mine with a cordless drill set on low speed. You can get the conversion kit from RCBS that allows you to use a drill. All it is a new larger allen head bolt where the handle bolts on and a straight allen head wrench that you can chuck in your drill. About 8 bucks from rcbs but you can probly come up with the same stuff from a hardware store for under a buck if you can determine the thread pitch of the bolt that holds the handle on.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
September 12th, 2010, 08:37 AM #4Senior Member
- Join Date
- Mar 2009
- Location
-
Pittsburhg area,
Pennsylvania
(Allegheny County) - Posts
- 440
- Rep Power
- 9118
Re: RCBS Trim Pro 3-way Cutter
Does this replace the standard head on the RCBS Trim Pro? I am buying one of these Trim Pros but haven't got it yet. Too tired of the Lee trimming product and I want to see how well the RCBS one does.
-
September 12th, 2010, 01:30 PM #5
Similar Threads
-
Just got a RCBS trim mate
By RUDY850 in forum Ammunition & ReloadingReplies: 1Last Post: January 16th, 2010, 09:56 AM -
CHEAAAPPP!! RCBS Trim Mate Prep Center
By ca2pa in forum GeneralReplies: 0Last Post: December 22nd, 2009, 08:28 PM -
CrossBreed MiniTuck: Pre- and Post- Trim Job
By jtkratzer in forum GeneralReplies: 4Last Post: September 26th, 2009, 09:40 PM -
RCBS Press w/ Auto Primer Attachment, Assorted New RCBS Dies, ETC>
By ajmacri in forum GeneralReplies: 1Last Post: April 10th, 2009, 09:14 PM -
Trim length question
By Lougotzz in forum GeneralReplies: 8Last Post: September 4th, 2008, 07:57 AM
Bookmarks