Results 1 to 3 of 3
Thread: Mossberg 500 Stocks for 20ga
-
January 14th, 2008, 11:38 PM #1
Mossberg 500 Stocks for 20ga
Okay possibly dumb question to follow.....
Are the stocks for a Mossberg 500 20ga and the 12ga the same? Some websites list the same stock for both, others say 12ga only.
Currently it has the bantam stock on it and is a little uncomfortable.
Mel
-
January 14th, 2008, 11:53 PM #2
Re: Mossberg 500 Stocks for 20ga
I think the butt stocks are all pretty much the same other that length of pull on a few models. The forearm on the 20ga may have a smaller diameter channel due to the smaller diameter tube magazine.
It really should matter much, the slider forks are the same width if I remember correctly.
However, dont take the info above as an absolute truth. Hopefully someone with both can step up and give exact information.RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
-
January 18th, 2008, 12:20 AM #3
Re: Mossberg 500 Stocks for 20ga
a 12 ga mossberg stock will not fit on a 20ga the receivers are 2 different sizes
here are factory 20ga parts at brownells
http://www.brownells.com/aspx/ns/sch...C%2c+20+Gauge+
here you can pick parts by model
http://www.brownells.com/aspx/ns/sch...Mossberg%C2%AELast edited by fultonCoShooter; January 18th, 2008 at 12:22 AM.
Similar Threads
-
Any1 here make stocks? Black Walnut Stocks?
By cas in forum GeneralReplies: 0Last Post: September 26th, 2007, 11:06 PM -
WTS: Mossberg 500 20GA Rifled Slug Barrel
By Legionnaire in forum GeneralReplies: 1Last Post: August 27th, 2007, 08:51 PM -
WTB: 870 youth 20ga.
By 96D in forum GeneralReplies: 0Last Post: June 3rd, 2007, 05:49 PM -
WTB: Used 20ga.
By 96D in forum GeneralReplies: 0Last Post: April 29th, 2007, 10:21 AM -
mossberg 500 stocks
By Triggerh4ppy in forum GeneralReplies: 2Last Post: April 2nd, 2007, 07:28 PM
Bookmarks