Results 1 to 10 of 13
-
September 1st, 2010, 04:37 PM #1
Best way to break -in a new in the pocket holster.
Leather in the pocket. Very tight, can not pull the gun with out the holster coming with ,even while trying to catch the "hook" as I draw.
Is there a product that I can apply to the inside of the rough leather?
TIA
BW
-
September 1st, 2010, 05:25 PM #2
Re: Best way to break -in a new in the pocket holster.
I've read threads from a few holster makers who recommended simply leaving the gun holstered for a few days to break in the leather. If it's really tight you could wrap the gun in a little plastic wrap or a plastic grocery bag and holster it for a few days.
-
September 1st, 2010, 05:40 PM #3
Re: Best way to break -in a new in the pocket holster.
Best way to break in a leather holster? IMHO, Use it. The leather will stretch a little. If you try to use something to force the break in process, you may end up with an overly loose holster as the leather naturally stretches from use.
-
September 1st, 2010, 08:58 PM #4
Re: Best way to break -in a new in the pocket holster.
I have had it in the holster for almost a week and it is still very tight.
Thanks for trying and I will keep it in there .
BW
-
September 1st, 2010, 09:04 PM #5
Re: Best way to break -in a new in the pocket holster.
While you're sitting around sometime, unload your gun, and insert it into the holster, now remove it, rinse, lather repeat. The gun just sitting in the holster won't break it in, the drawing process will. The holster should loosen up a bit with a few repetitions of the drawing process. I've made holsters which the gun had to really be forced into and out of, but after a dozen or two repetitions, the leather stretches just enough to make the draw and reholster easier.
-
September 1st, 2010, 09:18 PM #6Grand Member
- Join Date
- Jan 2007
- Location
-
OUT TO LUNCH
- Posts
- 4,556
- Rep Power
- 21474858
Re: Best way to break -in a new in the pocket holster.
I vote for walking around with it. When I get a new leather holster, I strap up and mow the yard, etc.
Jules
-
September 1st, 2010, 09:21 PM #7Senior Member
- Join Date
- Sep 2008
- Location
-
Effort,
Pennsylvania
(Monroe County) - Age
- 48
- Posts
- 372
- Rep Power
- 2241
Re: Best way to break -in a new in the pocket holster.
As stated by Lucas the proper way to break in a holster is to holster and draw the weapon. Do not put anything on the leather you will ruin it! In short order you will achieve the proper fit.
-
September 1st, 2010, 10:01 PM #8
-
September 1st, 2010, 10:14 PM #9
Re: Best way to break -in a new in the pocket holster.
-
September 1st, 2010, 10:33 PM #10Grand Member
- Join Date
- May 2010
- Location
-
Butler,
Pennsylvania
(Butler County) - Age
- 73
- Posts
- 1,053
- Rep Power
- 16314
Re: Best way to break -in a new in the pocket holster.
The breakin instructions that came with my fitted holster. If tight wrap one layer of wax paper around the gun and holster a few times. If still tight use 2 layers. One layer made a big difference. Also stated not to use anything but leather polish to clean. Any cleaner that will absurb into the leather could cause it to lose it's shape in time.
Similar Threads
-
Another Holster Question (pocket holster)
By cj11 in forum Concealed CarryReplies: 16Last Post: May 8th, 2010, 11:25 AM -
Meriden Arms Pocket Pistol .38S&W Top Break
By Feddog82 in forum GeneralReplies: 13Last Post: August 13th, 2009, 06:07 PM -
Thumb break holster question
By autotech6506 in forum GeneralReplies: 1Last Post: August 30th, 2008, 08:20 PM -
How to Break in a Leather Holster
By 00gt1 in forum GeneralReplies: 14Last Post: December 31st, 2007, 06:00 PM
Bookmarks