Results 1 to 10 of 12
Thread: 45 long colt on deer?
-
October 19th, 2007, 09:51 AM #1
45 long colt on deer?
ive heard that the 45long colt would work for deer but only if they are loaded very hot and used in a ruger i dont have a ruger and i do have the H&R hartford single action some say that they wont handle "hunting" loads others say they will i was goin to use a mild load like a 230 cast flat point at or around 1100fps goin to be shots under 50yds before goin out and buyin every thing just thought id ask
ZRT: SECTOR 3(SNIPER) Among othe tasks...
-
October 19th, 2007, 12:29 PM #2
Re: 45 long colt on deer?
according to wikipedia moderate .45 LC loads (not weak ones) are good enough for deer and black bear at short ranges.
P.S. a little punctuation might make the post easier to read.
-
October 19th, 2007, 12:39 PM #3
Re: 45 long colt on deer?
Here you go:
I've heard that .45LC would work for deer if they are loaded very hot and used in a Ruger lever action rifle. I don't have a Ruger, but I do have an H&R Hartford single action. Many say that this rifle won't handle hunting loads and others say it will. I was planning to use a mild load like a 230 cast flat point at, or around, 1100FPS. Most shots will be within 50 yards. Prior to purchasing the ammo, I would like any input that may be available.I own guns!
-
October 19th, 2007, 03:18 PM #4
Re: 45 long colt on deer?
A rule of thumb for pistol hunters that I remember seeing so long ago that I can't recall the source was: .40/200/1000, that is a minimum .40 caliber bullet of 200 grains traveling at 1000 fps. Your 230 gr. 1100 fps .45 Colt should do fine for whitetail deer at the ranges you mention. Just use a good bullet and pick your shots.
-
October 21st, 2007, 08:52 AM #5Junior Member
- Join Date
- Jun 2007
- Location
-
Adams County,
Pennsylvania
(Adams County) - Posts
- 21
- Rep Power
- 0
Re: 45 long colt on deer?
No need to really push the 45 Colt over what it was designed to do.
I just went down this road over the past few months. I thought I needed Ruger loads in the 45 Colt to make a go of deer hunting. Seems that isn't the case. This was a welcome wake up call for me since I don't like pushing loads and I'm not a big fan of big recoil.
The bottom line from the experienced:
A 250-260gr cast bullet designed for hunting (large meplat or driving band) @ 900 fps will sail right through deer.
Check out Bear Tooth Bullets. They have some good hunting bullets for the 45 Colt that can be loaded to standard pressure and work just fine.
-
October 22nd, 2007, 09:32 AM #6
Re: 45 long colt on deer?
thank. now to load a couple batches.
ZRT: SECTOR 3(SNIPER) Among othe tasks...
-
October 22nd, 2007, 09:53 AM #7
Re: 45 long colt on deer?
If you limit your shots to the ranges you can hit accurately the 45LC standard loads (AKA, not hot "ruger" loads) will be more than sufficient.
-
October 22nd, 2007, 10:34 AM #8
Re: 45 long colt on deer?
230gr @ 1100fps is probably over the threshold for that firearm. Thats 41-44mag energy territory. And to push a slug that fast, you'd have to be pushing the pressure limits.
A 250gr at 700-900fps (std 45LC loads) will take down a deer.
There are way too many people out there preaching that it takes uber-magnums to hunt deer. A std 250gr 45LC slug will probably pass through a deer just like a 44mag will. (remember, heavy bullets retain energy better than lighter ones) If the bullet has enough energy to pass completely through, then any remaining energy that the bullet has is a waste. Energy only matters when 100% of it is transfered(requires bullet to stop within target), otherwise you are working on hole damage to stop the critter.
Just load up some 240-250gr JHP's that expand at low velocity and get them at the mid-top end of the standard pressure levels for the 45 LC. Aim for the heart & lung area just like you would with any "deer" rifle. Keep your shots at short range.RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
-
October 27th, 2007, 09:17 PM #9Senior Member
- Join Date
- Jan 2007
- Location
-
Palmyra,
Pennsylvania
(Lebanon County) - Posts
- 273
- Rep Power
- 444029
Re: 45 long colt on deer?
if you want a .45 caliber that is 'magnumized' then use a .45-70...
seriously, the .45LC and .44-40 were taking game animals long before modern spitzer bullets and magnum handgun rounds were fathomed; you'll be fine (even with moderate cowboy loads) with something in the range of 225 gr to 250 gr solid lead for penetration and a large diameter hole;
you'll have the advantage of having your hearing intact, unlike your hunting buddies that insist on .44 magnum or .454 casull...you can always tell those guys when they start shoutin 'what!!! can ya speal up?!? I can't hear ya!'
-
October 27th, 2007, 10:10 PM #10
Re: 45 long colt on deer?
Might I suggest that you use a hard cast lead flatnose gas checked bullet with a wide .350" metplat area. This Cast Performance Bullet should work great on deer: http://www.midwayusa.com/eproductpag...778&t=11082005
Try this bullet with about 10.0gr. of Hodgdon's HS-6 and it should give you around 900FPS. Let us know how you make out!
Don
Similar Threads
-
Hunting deer w/ a .50 BMG
By species0113 in forum HuntingReplies: 96Last Post: February 4th, 2014, 12:48 AM -
Are there any deer??
By sureshot43 in forum GeneralReplies: 16Last Post: November 24th, 2008, 11:29 AM -
Deer decoys
By Montell C. Williams in forum GeneralReplies: 3Last Post: October 18th, 2007, 11:28 AM -
Possible Truce On Deer War
By bluetick in forum GeneralReplies: 8Last Post: May 19th, 2007, 01:21 AM -
Deer herds....
By Member0001 in forum GeneralReplies: 5Last Post: April 13th, 2007, 11:23 PM
Bookmarks