Engraving a gun

**glocking26** · July 2nd, 2010, 08:19 PM

I'm SBRing a mini UZI and need to get it Engraved. Any of you guys were I could have it done and wait there as they do it. I live I delaware county.
Thanks for the help.
Mike

**rockkrawler628** · July 4th, 2010, 07:12 PM

well, since noone responded, you may be better off sending it out to a place to have it done. Must go through FFL, but its entirely up to you. Unless of course you know a place that engraves plaques and such, they could possibly do it. But there your taking a risk of them messing it up. If a SBR reciever gets messed up beyond usage I believe you can not swap S/N's.

I took mine to a guy in lansdale and he did a good job. I'm sure thats pretty far from you though.

**Kramer** · July 4th, 2010, 07:18 PM

You can engrave all of the info (except serial number) on the barrel.

**glocking26** · July 5th, 2010, 08:48 PM

Thanks guys for that info.
Mike

**bwhited** · July 6th, 2010, 07:28 PM

Send it to Orion Arms. They do a GREAT JOB!!!

http://www.orion-arms.com/

**pa123guns** · July 8th, 2010, 07:03 AM

I second bwhited recommendation. Orion is top rate!!

**EchoAngel17** · July 8th, 2010, 02:36 PM

Originally Posted by rockkrawler628

well, since noone responded, you may be better off sending it out to a place to have it done. Must go through FFL, but its entirely up to you. Unless of course you know a place that engraves plaques and such, they could possibly do it. But there your taking a risk of them messing it up. If a SBR reciever gets messed up beyond usage I believe you can not swap S/N's.

I took mine to a guy in lansdale and he did a good job. I'm sure thats pretty far from you though.

Not exactally correct.
If the shop you are sending it to has a FFL, you can ship it directly to them.
I have used Ident Marking Services in TX.
I shipped it using an overnight service. Like others...it did not need to be stripped but I did remove the buffer, spring and tube to reduce the weight.

They did a fantastic job and the turnaround was about one week.
Use this link and send them a message...http://www.identmarking.com/contact.php
Clean professional work, prices were good and the fast turnaround was fantastic.
I had them do two AR lowers- one SBR stamp is back and the other is still pending. I am sending off my SW-5 next and I am picking up another AR lower as well.