Pennsylvania Firearm Owners Association
Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2018
    Location
    Bethlehem, Pennsylvania
    (Northampton County)
    Posts
    14
    Rep Power
    0

    Default Yugo M48 Safety Issue(??)

    Good evening Ladies and Gentlemen, hope your Sunday is going well. Sucks the Eagles lost, but hey, still SuperBowl Champs!

    Anyways, I bought myself yet another Yugo M48 over the weekend as a total impulse buy. Pretty nice gun, low serial number, #582 to be exact, matching stock, matching receiver, non matching bolt, but a very smooth action.. not sure about the floor plate or anything, but I nice solid looking and feeling gun. Has its blemishes here and there but overall, a good looking rifle. I'm no smith and I won't pretend to be one, so obviously have to get her checked out. Got myself a nice NO GO gauge coming so I might as well try this whole fix it yourself thing.

    My main issue with this ole girl is my safety. Seems to be stuck.
    I've heard it countless times about a stuck Mauser safety but just out here looking for opinions.


    As you can see here, with the bolt in the rilfe, uncocked the wing functions normally, and wont move.



    Cocked the gun and the wing now goes into its second/up position, normally.

    Thats where it stops. The wing wont move any further to the right to its third/full safe position.


    With the bolt out of the gun and somewhat apart...


    I can now fully engage the safety..

    My question is why? I'm not really trying to rip my bolt apart tonight and find out so any tidbits will help a bunch!

    So as a TL;DR
    Safety wont full engage when the bolt is in the rifle.
    It WILL engage when the spring/pin/safety assembly is out of the bolt body..
    Why??

  2. #2
    Join Date
    Feb 2010
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    9,636
    Rep Power
    21474860

    Default Re: Yugo M48 Safety Issue(??)

    Perusing the 'net, it appears that there is a mismatch between sear and cocking piece. It can be from worn parts, mismatched parts, or the result of someone having done a kitchen table "trigger job". It is suggested replace the sear and cocking piece with parts known to be in spec, or submit to a Mauser-oriented gunsmith.

  3. #3
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    5,440
    Rep Power
    16969192

    Default Re: Yugo M48 Safety Issue(??)

    Check this out: https://www.youtube.com/watch?v=Hiv4wX1K4V4

    It's not your solution, but may provide some insight.


    The other possible issue can be deciphered here: https://www.youtube.com/watch?v=1tGyxwYdqxc (around the 2 min mark)
    It has to do with the safety in the third position not lining up with a slot in the bolt.
    Last edited by Hawk; September 18th, 2018 at 02:04 PM.
    Toujours prêt

  4. #4
    Join Date
    Feb 2010
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    9,636
    Rep Power
    21474860

    Default Re: Yugo M48 Safety Issue(??)

    Great videos! Some people were a little concerned with my fascination with guns as a kid. The designs and precision was the attraction. I admired (and still do) the mind that spatially envisioned that function, and transformed it into physical reality.

  5. #5
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    5,440
    Rep Power
    16969192

    Default Re: Yugo M48 Safety Issue(??)

    Quote Originally Posted by Bang View Post
    Great videos! Some people were a little concerned with my fascination with guns as a kid. The designs and precision was the attraction. I admired (and still do) the mind that spatially envisioned that function, and transformed it into physical reality.
    I love tinkering with stuff. And only in the past few years Surplus rifles.
    Toujours prêt

  6. #6
    Join Date
    Aug 2018
    Location
    Bethlehem, Pennsylvania
    (Northampton County)
    Posts
    14
    Rep Power
    0

    Default Re: Yugo M48 Safety Issue(??)

    Just a little tid bit here guys.

    I stuck my other Yugo bolt in this rifle and the safety on that bolt wouldnt engage either.
    Stuck the bolt pictured in the other rifle and the safety too, would not engage to the 3rd position.

    Gonna check out those videos and see whats up.

    I have NO idea about this rifle. I had an extra $175 laying around and thought why not.

  7. #7
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    5,440
    Rep Power
    16969192

    Default Re: Yugo M48 Safety Issue(??)

    Quote Originally Posted by ZimbabweJones View Post
    Just a little tid bit here guys.

    I stuck my other Yugo bolt in this rifle and the safety on that bolt wouldnt engage either.
    Stuck the bolt pictured in the other rifle and the safety too, would not engage to the 3rd position.

    Gonna check out those videos and see whats up.

    I have NO idea about this rifle. I had an extra $175 laying around and thought why not.
    Try moving the bolt up and down just a little while attempting to engage the third position. Sounds to me like the safety is not indexing the slot in the bolt (see second video). Just as an FYI, I can't think of a practical use for the third position.
    Last edited by Hawk; September 19th, 2018 at 09:16 AM.
    Toujours prêt

  8. #8
    Join Date
    Aug 2018
    Location
    Bethlehem, Pennsylvania
    (Northampton County)
    Posts
    14
    Rep Power
    0

    Default Re: Yugo M48 Safety Issue(??)

    Neither can I, but being my first real rifle I'd rather know it all works like it should.

    Weird, cleaned the wing up real nicely and I can move it to the 3rd position but its a freaking beast.

    Problem solved/avoided

Similar Threads

  1. 1911 springfield armory safety issue
    By Kid k in forum Gunsmithing
    Replies: 6
    Last Post: June 25th, 2014, 08:34 PM
  2. YUGO SKS issue
    By wbhess192 in forum Rifles
    Replies: 13
    Last Post: April 29th, 2014, 01:24 PM
  3. Mossberg bolt actions - Is there a safety issue?
    By Pistol Packin Preacher in forum Rifles
    Replies: 5
    Last Post: October 2nd, 2011, 08:29 AM
  4. 1911 Grip Safety Issue
    By wboggs in forum Pistols
    Replies: 12
    Last Post: February 22nd, 2010, 08:45 AM
  5. PT1911 Safety / Reliability Issue?
    By msquaredserver in forum General
    Replies: 18
    Last Post: January 26th, 2009, 06:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •