Results 1 to 10 of 21
Thread: Help me troubleshoot my K frame
-
January 4th, 2018, 04:41 PM #1Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
Help me troubleshoot my K frame
So, I've got a brand new smith 66-8 K frame .357 mag revolver with 2.75"bbl that is giving me hell.
I inspected at purchase and everything seemed fine. Function tested everything. Tight lockup. Very slight rotational play in cylinder. No end shake.
At home I dry fired it a ton and everything was still fine. I had it out once and shot 50 158 gr 357 and 50 125gr 38sp+p and still everything was fine. No malfunctions. Cleaned it and function tested it again, good to go. More dry fire, no problem.
Then all of a sudden, the other day, I take it out to dry fire, and after I opened to cylinder and unloaded it, the cylinder would not close. Also, manually spinning the opened cylinder reveals that it is dragging somehow. I had to fiddle-fuck around with the cylinder and crane to get it closed. (The crane can be pushed forward and back from the muzzle, is this normal?)
Once closed it functions correctly and the cylinder does not drag or hangup during double action or single action, but once the cylinder is opened it sometimes will not want to close and I have to putts around with it.
No, I have never cowboyed the action closed. Yes, I cleaned thoroughly under the extractor star. Yes, I could call smith and wesson, but I prefer to fix it myself if possible.
FYI: This is a new model 66 and the lockup has been redesigned so that the crane locks into a detent attached to the frame. I thought this may be worth mentioning.
I can probably post pics or even video later on tonight or tonorrow if necessary, and I intend to do further research into disassembly this weekend and possibly open her up, but In the mean time, does anyone have any ideas?
BTW: I purposefully posted this here because the troubleshooting forum gets far less views, hopefully that will not be a problem. Thanks.
-
January 4th, 2018, 05:03 PM #2
Re: Help me troubleshoot my K frame
1) See if the ejector rod is becoming unscrewed. It is a LEFT hand thread, so you would TIGHTEN COUNTERCLOCKWISE. Usually manifests as not being able to OPEN the cylinder/crane when the thumbpiece is pressed forward.
2) See if the crane retention screw is tight. This is the one at the extreme front "panhandle" of the sideplate.
This is a new model 66 and the lockup has been redesigned so that the crane locks into a detent attached to the frame.
HTH,
NoahWisdom and knowledge shall be the stability of thy times.
-
January 4th, 2018, 05:26 PM #3Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
Re: Help me troubleshoot my K frame
It was the ejector rod. I had checked it, but did not realize it was reverse threaded. It had loosened to where the extractor star was contacting the breech face during closing (I guess you still call that a breech face on a revolver). I'm still going to open it up and check the crane retention screw as well. I am not sure if the ability to move it forward and back is normal, but it seems odd.
Anyway, thank you for the quick response and quick fix.
-
January 4th, 2018, 05:41 PM #4
Re: Help me troubleshoot my K frame
No, not odd at all. The ejector rod self-loosening is not uncommon. There are "wrenches" of sorts available from Brownells and Midway, probably, for snugging up ejector rods without over-tightening and stripping the threads.
Glad to help,
NoahWisdom and knowledge shall be the stability of thy times.
-
January 4th, 2018, 05:49 PM #5Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
-
January 4th, 2018, 05:56 PM #6
Re: Help me troubleshoot my K frame
Glad you got the thing fixed! Kudos to Noah for his know how too! How about giving us a report on your impression of the action. I've had a bone to pick with S&W on the action of the last two revolvers I bought from them, one a Model 67-5 the second a Model 986. In both cases trigger pull was very heavy in both SA and DA. Cocking the hammer to fire SA I can only describe as rough. What is your impression?
"Those who can make you believe absurdities can make you commit atrocities".
-
January 4th, 2018, 06:47 PM #7Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
Re: Help me troubleshoot my K frame
The fact is, I am lacking in comparison, as I am just now becoming interested in revolvers. However, I am very pleased with the action. I was initially wary from reading some reviews complaining of rough and overly heavy double action pull on newer Smiths, however I was pleasantly surprised.
The double action breaks between 9.5 and 10# according to my cheap lyman gauge, and it is quite smooth. The single action is a crisp 3.5-4#. Honestly, I could not be happier with the trigger pull. I feel like I hit the lottery in that regard.
-
January 4th, 2018, 07:13 PM #8
Re: Help me troubleshoot my K frame
1) It is not uncommon for ejector rods to self-loosen.
b) S&W cylinders, when the crane is open and the cylinder is swung out, typically have a couple mm of play fore and aft inside the cylinder bearing hole in the crane. The ejector rod and cylinder assembly moves toward the muzzle and back toward the recoil plate INSIDE the crane.
iii) S&W cranes DO NOT move fore and aft with respect to the frame when the crane is open and the cylinder is swung out, and the crane retention screw is tight. If the crane retention screw is loose, the crane can move fore and aft with respect to the frame, and will need to be shoved to the rear in order to close the cylinder.
HTH,
NoahWisdom and knowledge shall be the stability of thy times.
-
January 4th, 2018, 07:27 PM #9Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
Re: Help me troubleshoot my K frame
The crane can be pushed forward with a moderate effort (not excessive) and snaps back rearward when pressure is released. I am now wondering if this could be designed, as a part of the lockup between the crane and the detent in the frame.
I intend to open the side plate tomorrow and have a better look.Last edited by marinville; January 4th, 2018 at 07:31 PM.
-
January 4th, 2018, 07:48 PM #10
Re: Help me troubleshoot my K frame
These new S&W revolvers have a different crane retention screw consisting of a cone point tip that is backed by a spring in the body of the screw. The groove in the crane journal is also a V in profile. Because of the spring loaded tip, there can be some play of the crane w.r.t. the frame, but the "snap back" of which you speak is the spring pushing the cone tip into the female V groove and forcing the crane back into alignment.
They went to this design because it is essentially self-aligning and requires less hand fitting than the former dog point screw and rectangular groove in the crane journal. If you break it down, you'll see.
NoahWisdom and knowledge shall be the stability of thy times.
Similar Threads
-
Help me troubleshoot my 1911
By rxer311 in forum PistolsReplies: 16Last Post: July 30th, 2012, 12:07 PM -
All you mechanics who love to troubleshoot....
By Bmarshall91 in forum GeneralReplies: 17Last Post: December 30th, 2009, 11:39 PM -
Small engine troubleshoot help needed
By Plinker in forum GeneralReplies: 7Last Post: November 23rd, 2008, 12:41 AM
Bookmarks