Results 91 to 100 of 296
Thread: SEPA Milling Party?
-
January 28th, 2020, 10:28 PM #91
Re: SEPA Milling Party?
Ok, I just watched the instructions video for the Easy Jig Gen2.
https://www.80percentarms.com/produc...-80-lower-jig/
This jig is about $250, but it won't be consumed for casual use. I'd say it should last dozens of lowers at a minimum. It is designed for use with bushing that won't damage the jig when cutting. The drilling may potentially consume the sides if people are careless, but not quickly.
Since everybody needs to do the work themselves, this would be the system I recommend. I'll happily get it, and say charge $20 or $30 bucks to use it. This would be good to use for years, and should be easy for not very skilled people to use.
Does this sound good to everybody? We can probably mill a lower in about 1/2 an hour or less with a little practice.
-
January 28th, 2020, 10:30 PM #92
-
January 28th, 2020, 10:31 PM #93
Re: SEPA Milling Party?
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
January 28th, 2020, 10:34 PM #94
Re: SEPA Milling Party?
How can you have any cookies if you don't drink your milk?
-
January 28th, 2020, 10:34 PM #95
-
January 28th, 2020, 10:37 PM #96
-
January 28th, 2020, 10:40 PM #97
Re: SEPA Milling Party?
Got it. Thinking a little more about it, I'll get it and just let PAFOA people use it. Should keep it cleaner that way then. If nobody objects, I'll get it tonight, and a lower to try a test run with.
It will be good for AR-15, AR-9, and .308, so most lowers we might want to use.
I've been blessed by support from this forum and I'm happy to pay it forward.
-
January 28th, 2020, 10:53 PM #98
Re: SEPA Milling Party?
If we get raided by Shapiro, you will all get away. I won't be able to run.
-
January 28th, 2020, 10:56 PM #99
-
January 28th, 2020, 10:58 PM #100
Similar Threads
-
Anyone want to have a milling party for their 80% receivers..
By edstephan in forum RiflesReplies: 24Last Post: January 26th, 2020, 04:03 PM -
AR milling jig
By jbraun948 in forum GunsmithingReplies: 0Last Post: March 10th, 2014, 03:32 AM -
Custom milling on my M&P Pro
By garyaug in forum PistolsReplies: 11Last Post: August 28th, 2013, 09:42 PM -
Hk USC/ump milling
By BIRTHMACHINE in forum GeneralReplies: 3Last Post: December 10th, 2009, 09:18 AM
Bookmarks