Results 1 to 4 of 4
-
June 28th, 2010, 11:07 PM #1Senior Member
- Join Date
- Dec 2007
- Location
-
Oxford,
Pennsylvania
(Chester County) - Posts
- 469
- Rep Power
- 10119
How far is too far when seating a bullet
Just out of curiosity, how far deep past the + or - .005" can you seat a bullet. I never had a problem with this but just out of curiosity, how far deep would you have to go to possibly result in a kaboom. I have accidently seated my .45 colt cartridge projectiles around - .007-.008" and shot them with no problems in my ruger blackhawk. Just curious about the kaboom stories I have read about.
-
June 29th, 2010, 03:12 AM #2Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
Re: How far is too far when seating a bullet
Plus or minus .005" is nothing to be concerned about, particularly with 45 colt.
The thing is that powders ordinarily behave in a predictable fashion. Notice "ORDINARILY". When used according to recognized published relaoding data.
Having the powders confined in the case, behind the bullet when ignited, causes a predictable rise in temperature and pressure of the expanding gasses. This rise in temperature and pressure also has a "time" component. Kind of imagine a graph, with the X coordinates being the temp/pressure, and the Y as time. When you decrease the internal volume of the case behind the bullet, the temp/pressure will rise quicker, generally. (Remember, I'm speaking "IN GENERAL" for all this). When temperature rises, burning accelerates. When pressure rises, burning (time) accelerates. When time accelerates, both pressure and temperature rise accordingly. So if you confine things too tightly, you get "KaBOOM!" More powder makes for more heat and more pressure and it all happens in a finite amount of time.
The object is to extract the maximum energy from the powder, while keeping the pressure below the safe limits. And to have it happen in a length of time that will propel the bullet at a maximum velocity for the amount of powder expended, given the barrel length of the firearm.
Reloading is safe and reasonable, and very predictable, when you keep within the published limits. Seating the 45 Colt slug .008" deeper will not reduce the case volume appreciably (figure the percentage of volume, here). But on other things like maybe 9mm, .040" is a significant percentage.
Flash"The life unexamined is not worth living." ....... Socrates
-
June 29th, 2010, 08:03 AM #3Senior Member
- Join Date
- Dec 2007
- Location
-
Oxford,
Pennsylvania
(Chester County) - Posts
- 469
- Rep Power
- 10119
Re: How far is too far when seating a bullet
That makes sense, thank you for that info. It also makes me feel better.
-
February 14th, 2011, 12:00 AM #4
Re: How far is too far when seating a bullet
Similar Threads
-
357 sig bullet seating problems
By max384 in forum Ammunition & ReloadingReplies: 15Last Post: February 13th, 2013, 11:38 PM -
Bullet jump,seating depth & powder charge ???
By ah141nj in forum Ammunition & ReloadingReplies: 3Last Post: January 12th, 2010, 06:17 AM -
Forster .223 Benchrest seating die(s)
By Fr0sty in forum GeneralReplies: 1Last Post: December 30th, 2009, 07:42 AM -
Bullet Runout / Seating Die Test
By Posit in forum GeneralReplies: 0Last Post: September 12th, 2009, 09:00 AM -
Bullet seating question on JHP or FMJ bullets
By watson524 in forum GeneralReplies: 7Last Post: November 19th, 2008, 06:17 PM
Bookmarks