Results 81 to 90 of 296
Thread: SEPA Milling Party?
-
January 28th, 2020, 09:55 PM #81
-
January 28th, 2020, 10:05 PM #82
Re: SEPA Milling Party?
This could be handy too: https://www.thingiverse.com/thing:3351478
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
January 28th, 2020, 10:07 PM #83
Re: SEPA Milling Party?
If the mill is tight enough, I'd probably prefer to scribe the limits using the jig and just mill out the cavity directly. But I'm not sure how well I can do that with a lathe with a milling attachment.
On my mill, if I scribed the limits of the cavity, I'd rough it out, leaving about roughly .025" extra on the walls, the mic the walls and cut to size. It would probably take longer per person, but you'd get a nice finish and a good fit.
But it sounds like there are several different styles of what needs to be milled.
-
January 28th, 2020, 10:13 PM #84
-
January 28th, 2020, 10:17 PM #85
-
January 28th, 2020, 10:20 PM #86
Re: SEPA Milling Party?
I want in.
-
January 28th, 2020, 10:22 PM #87
Re: SEPA Milling Party?
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
January 28th, 2020, 10:26 PM #88
Re: SEPA Milling Party?
As for timing, if we can push it out until March at least, that should give me some time to be getting around after my knee surgery which is next week. Won't be freezing then hopefully either.
But don't schedule around me.
-
January 28th, 2020, 10:27 PM #89
-
January 28th, 2020, 10:28 PM #90
Re: SEPA Milling Party?
First we're going to give it a go before we gather a big crowd and see how it goes. Then we'll have a good idea of what we're up against. It would bite if we all got together and for some reason it didn't pan out.
Gender confusion is a mental illness
Similar Threads
-
Anyone want to have a milling party for their 80% receivers..
By edstephan in forum RiflesReplies: 24Last Post: January 26th, 2020, 04:03 PM -
AR milling jig
By jbraun948 in forum GunsmithingReplies: 0Last Post: March 10th, 2014, 03:32 AM -
Custom milling on my M&P Pro
By garyaug in forum PistolsReplies: 11Last Post: August 28th, 2013, 09:42 PM -
Hk USC/ump milling
By BIRTHMACHINE in forum GeneralReplies: 3Last Post: December 10th, 2009, 09:18 AM
Bookmarks