Results 1 to 10 of 10
Hybrid View
-
January 14th, 2008, 03:08 PM #1Junior Member
- Join Date
- Jan 2008
- Location
-
West Branch,
Michigan
- Posts
- 2
- Rep Power
- 0
Seeking start to FINISH on stock refinshing
Seeking start to finish how-to's on stock refinishing. Never done it before but have project waiting for knowledge to be applied.
-
January 14th, 2008, 03:58 PM #2
Re: Seeking start to FINISH on stock refinshing
I'll be watching this thread too, I have tried this in the past and the results weren't very good, lots of little air bubbles.
-
January 14th, 2008, 04:00 PM #3
Re: Seeking start to FINISH on stock refinshing
-
January 14th, 2008, 04:55 PM #4
Re: Seeking start to FINISH on stock refinshing
Actually not that hard to do and the results are extremely satisfying. First I would suggest posting a pic of the stock you want to work on so we can see what is needed. Any cracks? gouges? etc? What kind of finish?
-
January 14th, 2008, 05:12 PM #5
Re: Seeking start to FINISH on stock refinshing
It may be made for paintball gun re-finishing, but this is a good place with tips - http://www.mcarterbrown.com/forums/s...finishing.html
Then again, the guns talked about there are worth more than any of my firearms....
-
January 14th, 2008, 06:43 PM #6
Re: Seeking start to FINISH on stock refinshing
Someone please explain the process from a rough cut.
I have no wood skills.
-
January 14th, 2008, 06:43 PM #7
Re: Seeking start to FINISH on stock refinshing
Great pun there...stock refinishing: start to FINISH!
Hopefully you won't have to learn it the way I learned bricklaying.....by trowel-and-error.There are three kinds of people in this world....them what's good at math and them what ain't.
Similar Threads
-
How to polish bright finish stainless?
By RocketFoot in forum GeneralReplies: 12Last Post: September 13th, 2010, 06:43 PM -
WTB: Sig P232 or older P230 - Any finish OK
By BIA_Design in forum GeneralReplies: 1Last Post: January 16th, 2008, 08:05 PM -
WTS: Mossy 500 Folding Stock, Tapco T-6 Stock
By RoyJackson in forum GeneralReplies: 1Last Post: November 26th, 2007, 11:12 AM -
How to keep Blued finish looking nice!
By RocketFoot in forum GeneralReplies: 6Last Post: July 16th, 2007, 02:03 PM -
WTB: CZ 75 Stainless or Nickel Finish
By Cole in forum GeneralReplies: 0Last Post: July 16th, 2007, 12:13 PM
Bookmarks