Buy a cheap piece of rail and drill and tap the receiver. There are companys that sell rails to mount to the rear of ak pistols
Printable View
Buy a cheap piece of rail and drill and tap the receiver. There are companys that sell rails to mount to the rear of ak pistols
https://masterpiecearms.com/shop/mpa...without-stock/
Looks like everything youd need..
Yup that is correct.... The SB tactical FS1913 brace has the folder mechanism already built in... So the one one above would add a second unneeded joint.... (Like a wrist and elbow if you follow). I bet I could weld a piece of rail to the mount from MPA.... But at $80 a pit pricy..... For what will just be a spacer to mount the rail.... The receiver is already drilled and tapped.... With three holes in a triangle pattern....
This is the brace I want to add to the MPA:
https://www.sb-tactical.com/product/fs1913/
* this wouldn't be such a hassle with the old style MPA or Cobray Mac-11s, Stormwerks makes a bolt on adapter with rail,
That I could simply bolt together with the 1913 brace.... But it doesn't fit the new style MPAs... Like I just bought....
http://stormwerkz.com/stock-adapters...-type-2-m1913/
Since a pic is worth a thousand words.... Here are a couple of pics of my MPA:
https://i497.photobucket.com/albums/...08D884D07.jpeg
https://i497.photobucket.com/albums/...4D02940E9.jpeg
Here is a picture of a clone Mac-11 with a Sig brace, and the stormwerkz adapter.... But would be pretty close to what I wanna do with my MPA:
https://i497.photobucket.com/albums/...B11F681C8.jpeg
The more I look at this, and read reviews, the more I think I'll go with the side folding MPX Sig brace..... It is cheaper,
And from what I have read, more ridged then the SB tactical 1913 brace.
http://stormwerkz.com/stock-adapters...dapter-type-2/ you may be able to find cheaper ones, or make one.
Thanks USMC3531,
I will check that one out.... I have access to a MIG welder..... (But have no great skill!) so I may try and cobble up something
That will get the job done.... It Seems like MPA went to a lot of trouble threading the end of their aluminum receiver.... Only to have no accessories available....
I can't imagine why they did not put a threaded hole in the center of the back of the receiver.... Nor why they did away with the one on the underside behind the grip.... Which is where most aftermarket company's like US Machine Gun and Stormwerkz mount them..... It is a little frustrating..... But if ya can't buy.... Then make....
Well.... I'll give it the old college try anyway!
Thanks!
F.
I have a piece of unfinished aluminum rail you are welcome to have. Cut a plate to match the rear, drill it to match the receiver then bolt this rail to the plate...
Hey Guys,
I picked up a used Cobray for a good price, (thanks DirectorNCS!), and added the Stormwerks adapter and the SB tactical 1913 brace....
Haven't shot it yet but maybe tomorrow! I really want to use the 1913 brace on my MPA so am gonna try my hand at building an adapter out of 1/4" aluminum bar stock.... I'm not sure how I am gonna locate the mount holes.... But I have a set of calipers.... So guess just located the X and Y axis and go from there.... How hard can it be?
(Famous last words!)
I
Thanks!
Fred
https://i.postimg.cc/C5J3YZzb/ED2938...AAC4-B55-B.jpg
https://i.postimg.cc/15CkjqxQ/685-B6...E85942-A82.jpg
https://i.postimg.cc/zvDQdJ0v/C21483...869-B2-DD1.jpg