Need advice = Issue with Sig P-365 magazine
This forum has always been a great help with any issues or advice I sought help with in the past and I appreciate that.
I have a new (previously fired about 48 rounds through it since purchase). 12-round Sig P-365 9mm magazine.
Last time out to the range I fired another 12 from this magazine and when I went to reload it and even after 4-5 tries, it would only load 3 rounds then act like it was fully loaded. I kept trying but still would not accept more than 3 rounds. Any advice? What do you think gunsmiths? Spring problem, follower problem???
Thanks.
Re: Need advice = Issue with Sig P-365 magazine
Have you disassembled the magazine to see why it’s binding?
Re: Need advice = Issue with Sig P-365 magazine
Unless the body got dented, yea I'd take it apart.
Re: Need advice = Issue with Sig P-365 magazine
Thank you, I took it apart, no obvious flaws, cleaned it and reassembled it and now it loads without a problem. I appreciate your reply, thanks for taking the time.
Re: Need advice = Issue with Sig P-365 magazine
Thank you. Took it apart, cleaned it, reassembled it, fine now.
Re: Need advice = Issue with Sig P-365 magazine
Not shaming you but so few people give their mags some love. Depending on use run a oiled and dry patch trough your mags every so often 1-2 years? You might be shocked how they come out.
Re: Need advice = Issue with Sig P-365 magazine
If it happens again, send it back to SIG for replacement.
Noah
Re: Need advice = Issue with Sig P-365 magazine
maybe the spring was upside down or backwards, it happens.
Re: Need advice = Issue with Sig P-365 magazine
Thanks, but it is only a few months old with less than 60 rounds through