Burst fire Gen 2 Annealer

Tried out my new Burst Fire 2 in 1 Gen 2 Annealer. The 2 in 1 is that it's also a case prep center with 4 rotating positions. It takes standard case prep tools. I will never use the prep center as I have the RCBS case prep. However, the annealer was very easy to set up. I annealed 500= 22-250 cases and 500 =223 cases, with a small adjustment of the flame. Switching cases, all came out looking great. Once you find the right speed, you fill the hopper and sit back and watch the annealed cases drop. So far, no complaints.

Nice. I have had a annealeaze for awhile. I mainly use it for converting
brass like 5.56 to 300.

Are you using templaq

No i lower the lights in the shop and watch the color. and adjust the speed when everything looks good.

Small problem with the burst fire. I e-mailed them about the add on short case feed ramp to anneal 45LC and 41- 44 mag cases. They said it would. Problem was. The case rim jams up behind the top wheel., I used a large flexible magnetic sticker, I cut it out so the top wheel would clear. Works great on the revolver cases now. I did 500 of the 41cases last night, next will be the 44 mag and 45LC. I really don*t think it will work with any cases shorter than the above.