Smith and Wesson 617 .22 Revolver - some advice needed
Yesterday I purchased a new Smith and Wesson model 617 .22 Revolver.
Mine is the 4" barrel with the 10 shot cylinder.
I took it to the ranger last night and so far I am really happy with the gun for accuracy. However, the trigger pull is a bit much. How much difference should I expect once the gun is "broken in"? I put maybe 200 rounds (give or take) through it before the cylinder was pretty dirty and the shells were starting to stick upon ejection.
Even though the trigger pull is heavy, it is very smooth and does that classic S&W thing where the cylinder locks into place right before the hammer drops (which I love).
Essentially, I'd like to keep the feel of the gun the same, just with less pounds required to pull the trigger.
Also, I'm thinking I'd like to put wooden target grips and a fiber optic front on it. Any thoughts or suggestions?
After shooting single and double action with this gun, my Beretta 92FS felt like it had no trigger pull in double action.
-Zach
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Find someone that knows revolvers, shops that deal with cowboy stuff would be a good start. A lighter spring will help a lot, just have that done and not a full trigger job.
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Unless they changed things, there's a set screw on the lower front of the grip which controls the tension of the hammer spring. Undo that a couple turns and it will make things easier.
Re: Smith and Wesson 617 .22 Revolver - some advice needed
First off, the strain screw is not an adjuster of trigger pull weight. NEVER, use it to loosen or adjust the trigger pull. The strain screw should always be tight as can be and possibly in place with loctite.
You live close by to Classic Pistol, get over there and ask for John Robinson. John is an expert gunsmith and knows revolvers very very well. He has done work on a few of my carry revolvers and the quality is top notch. His action jobs are indeed quite smooth. Tell him what you want and he will make it happen.
To all of those out there that may play with their strain screw to adjust the trigger pull weight BEWARE. If that is a carry gun, you may be risking your own life. A loose strain screw will back out to the point of failures to fire as there will be insufficient pressure provided by the mainspring to drive the hammer to properly light off a primer. Never, ever leave the strain screw on a Smith and Wesson revolver in any other condition then very very tight!!!
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Hmm...gunsmithing will have to wait. I just dropped a lot of money on the revolver and a few moments ago purchased a set of checkered wood grips for it from Hogue.
I think next is the front sight and then the trigger.
So any thoughts on the front sight? HiViz? TruGlo?
-Zach
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Looks like HiViz makes a front sight specifically for the 617. So far that is top of the list. However, I am wondering how easy or difficult it is to drill the hole for the roll pin. I'd hate to order the sight and ruin it.
I own a drill press but otherwise no specialized tools.
-Zach
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Quote:
Originally Posted by
Steve_NEPhila
To all of those out there that may play with their strain screw to adjust the trigger pull weight BEWARE. If that is a carry gun, you may be risking your own life.
Oh no! The sky is falling! The sky is falling!
It works. If you're stupid enough to make any changes to the firing mechanism without making sure that the gun still functions before carrying it, you shouldn't own guns.
In 30 years of owning S&W revolvers, I've never had a strain screw back out on its own.
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Quote:
Originally Posted by
zachomega
I think next is the front sight and then the trigger.
So any thoughts on the front sight? HiViz? TruGlo?
-Zach
From everything I've heard the cheapest way to make your trigger more smooth (not lighter, but smoother) is to shoot it. Pop some snap caps in there (I don't know if you can get .22 snap caps but you can make them) and pull away. This will also help with familarizing you with the DA trigger pull, which can take some getting used to. It will also help strengthen your finger, making pulling the long hard trigger easier.
As far as sights pick whatever looks best to you.
Re: Smith and Wesson 617 .22 Revolver - some advice needed
I second what Wiley x said, i adjusted my model 66 in 1996 and the screw hAS NEVER MOVED , JUST A NICE SWEET TRIGGER pull , i can understand why Gunsmiths dont want people to know about this screw, less for money for them for a "trigger job"
Nyman
Re: Smith and Wesson 617 .22 Revolver - some advice needed
Quote:
Originally Posted by
mrnyman
I second what Wiley x said, i adjusted my model 66 in 1996 and the screw hAS NEVER MOVED , JUST A NICE SWEET TRIGGER pull , i can understand why Gunsmiths dont want people to know about this screw, less for money for them for a "trigger job"
Nyman
Ah yes. You are correct up to a point. See, one of the things a 'smith will do as part of a trigger job is to shorten the strain screw so it can be set full in and tight, but still provide a lighter trigger pull. (note if strain screw is too tight the trigger will not release and reset correctly)
But, user beware! A light set might limit choice of ammo or primer (if you reload). Think Federal primers yes, Winchester sometimes and CCI damn near no way in hell and forget it completely for Wolf!