smaller disks for Lee Pro Auto-Disk Powder Measure

[Arrdy]

... I didn't like the idea of not being able to "almost" finish the powder in the hopper if goes below 2/3.

As part of your post cleanup you can always empty the hopper.

What Lee needs to do is make discs with volumes somewhere in between the ones they have already. For example, they have .32cc, .34cc, then it jumps to .37cc. Why not make .33, .35, and .36cc..

Or blank ones that you can drill as needed.

I had an early disk setup (with the return spring) and never had good luck with it. Got the charge bar upgrade kit, and my loads are rather constant, never more then +/- 0.1 grains. If the load goes light, I'll add more powder and I'm good to go.

What I really disliked about the disc setup, to change charges, you had to disassemble it, a failure waiting to happen, and your charge was always 'close'.

[Caspian]

Thank you all for the many responses.

Somehow missed the existence of the charge bar during my perusing of the Lee Precision website. Purchasing today :-)